LTC4416IMS-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 10 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2007 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, Industrial/Automotive, High Current Switch |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3.6V~36V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4416 |
| Pin Count | 10 |
| JESD-30 Code | S-PDSO-G10 |
| Supply Voltage-Max (Vsup) | 36V |
| Power Supplies | 12V |
| Supply Voltage-Min (Vsup) | 3.6V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 130μA |
| FET Type | P-Channel |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | No |
| Delay Time - OFF | 30μs |
| Delay Time - ON | 60μs |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4416IMS-1#TRPBF Overview
The case is 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)-shaped. A Tape & Reel (TR) case is a good choice for packing the part. Surface Mount is the way the part is mounted. We give it a voltage of 3.6V~36V. In order for this component to operate properly, its minimum operating temperature must not exceed -40°C~125°C. It is suitable for the component connected in Battery Backup, Industrial/Automotive, High Current Switch. Source Selector Switch is the category for the device. The FET type can be recognized as P-Channel. 10 terminations are available in the part in order to meet your needs. There are 10 pins on the board and it is designed with them. LTC4416 is the basis for the part. It is powered by 12V to deliver its perfomance. This part's peak reflow temperature is utilized to run 260. Using 130μA to run part supply current. This part is part of the Power Management Circuits family of parts. For this part, Vsup cannot be less than 3.6V. 36V represents the maximum supply voltage (Vsup). As a result, it is capable of delivering voltage at 12V. In this case, we are dealing with a device from the PowerPath? series.
LTC4416IMS-1#TRPBF Features
in a 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) case
FET Type: P-Channel
10 terminations
Peak Reflow Temperature (Cel) : 260
LTC4416IMS-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4416IMS-1#TRPBF Ideal Diode controller applications.
- Power Tools
- Cell phones
- Head Unit
- Automotive infotainment systems - head unit,telematics control unit
- Power supply reverse polarity protection
- Asset tracker
- Automotive battery protection
- Automotive ADAS systems - camera
- Automotive USB hubs
- AC Rectifier