LTC4415IMSE#TRPBF
| Parameters | |
|---|---|
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4415 |
| Pin Count | 16 |
| JESD-30 Code | R-PDSO-G16 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.6V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Number of Channels | 2 |
| Current - Output (Max) | 4A |
| Adjustable Threshold | YES |
| Current - Supply | 44μA |
| FET Type | P-Channel |
| Supply Current-Max (Isup) | 0.08mA |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | Yes |
| Height Seated (Max) | 1.1mm |
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, High Current Switch |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 1.7V~5.5V |
LTC4415IMSE#TRPBF Overview
A 16-TFSOP (0.118, 3.00mm Width) Exposed Pad case is included with it. In Tape & Reel (TR) cases, the part will be well protected. Mounting is done along the Surface Mount-axis. We give it a voltage of 1.7V~5.5V in order to test it. There must not be a minimum operating temperature of -40°C~125°C for this component. A component connected in Battery Backup, High Current Switch would be a good fit for it. The device is categorized as Source Selector Switch. A type of FET known as P-Channel is a type of FET that can be recognized by its symbol, which can be found on the package. A 16 termination is available on the part. As you can see, it is designed with 16 pins. LTC4415 is the base of this part. This device is powered by 3.6V in order to deliver a high level of performance. To run NOT SPECIFIED, we use the peak reflow temperature of this part. It is necessary to run the supply current of the part at 44μA in order to make it work. A Power Management Circuits family part is involved in the project. There should be no less than 1.7V voltage supply for this part (Vsup). When Vsup reaches its maximum value, the maximum supply voltage is reached as soon as it reaches 5.5V. The supply current (Isup) should conduct under 0.08mA. At 3.6V, it can deliver voltage. Chips can work when the output current carries under 4A. PowerPath?-series devices are considered to be the best.
LTC4415IMSE#TRPBF Features
in a 16-TFSOP (0.118, 3.00mm Width) Exposed Pad case
FET Type: P-Channel
16 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
LTC4415IMSE#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4415IMSE#TRPBF Ideal Diode controller applications.
- PDAs
- AC Rectifier
- Factory automation and control - PLC digital output modules
- Camera ECU
- Active ORing for redundant power supplies
- Alternator
- Asset tracker
- MP3 Players
- Automotive ADAS systems - camera
- Automotive battery protection