LTC4415IMSE#PBF
| Parameters | |
|---|---|
| Length | 4.039mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-TFSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tube |
| Published | 2011 |
| Series | PowerPath™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Source Selector Switch |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Battery Backup, High Current Switch |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 1.7V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 2 |
| Supply Voltage | 3.6V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4415 |
| Pin Count | 16 |
| Qualification Status | Not Qualified |
| Max Output Current | 4A |
| Supply Voltage-Max (Vsup) | 5.5V |
| Power Supplies | 3.6V |
| Supply Voltage-Min (Vsup) | 1.7V |
| Number of Channels | 2 |
| Operating Supply Current | 44μA |
| Adjustable Threshold | YES |
| FET Type | P-Channel |
| Supply Current-Max (Isup) | 0.08mA |
| Ratio - Input:Output | 2:2 |
| Internal Switch(s) | Yes |
| Height | 860μm |
LTC4415IMSE#PBF Overview
There is a 16-TFSOP (0.118, 3.00mm Width) Exposed Pad case that comes with it. The Tube case is ideal for packing the part. I would like to point out that the part is mounted in the way of Surface Mount. The voltage that is applied to the circuit is 1.7V~5.5V. There must not be a minimum operating temperature of -40°C~125°C for this component. It is suitable for the component connected in Battery Backup, High Current Switch. Source Selector Switch is the category for the device. There is a P-Channel type of FET. In the part there are 16 terminations that are available. There are 16 pins on the board and it is designed with them. The part is based on LTC4415. Powered by 3.6V, it is capable of delivering its performance to its customers. In order to run NOT SPECIFIED, a part's peak reflow temperature is utilized. This part is part of the Power Management Circuits family of parts. The part has 16 pins. For this part, Vsup cannot be less than 1.7V. A maximum supply voltage is achieved as soon as Vsup reaches 5.5V, which means it is at its maximum level. This device is powered by 44μA, which is the supply current it uses to operate. A supply current (Isup) should be conducted under the condition 0.08mA. At 3.6V, it can deliver voltage. Parts can be delivered with 4A output current. Devices in the PowerPath? series are included in the device.
LTC4415IMSE#PBF Features
in a 16-TFSOP (0.118, 3.00mm Width) Exposed Pad case
FET Type: P-Channel
16 terminations
Peak Reflow Temperature (Cel) : NOT SPECIFIED
LTC4415IMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4415IMSE#PBF Ideal Diode controller applications.
- Automotive USB hubs
- Automotive infotainment systems - head unit,telematics control unit
- Head Unit
- Power supply reverse polarity protection
- Active OR-ing of Redundant (N+1) Power Supplies
- PCs
- AC Rectifier
- Asset tracker
- Motor drives
- Camera ECU