LTC4357IMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | N+1 ORing Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Automotive, Redundant Power Supplies, Telecom Infrastructure |
| HTS Code | 8542.39.00.01 |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 9V~80V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 20V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4357 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Supply Voltage-Max (Vsup) | 80V |
| Power Supplies | 9/80V |
| Supply Voltage-Min (Vsup) | 9V |
| Number of Channels | 1 |
| Adjustable Threshold | NO |
| Current - Supply | 500μA |
| FET Type | N-Channel |
| Supply Current-Max (Isup) | 1mA |
| Ratio - Input:Output | N:1 |
| Internal Switch(s) | No |
| Delay Time - OFF | 300ns |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LTC4357IMS8#TRPBF Overview
The case is made of 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) plastic. Packing the part in Tape & Reel (TR) cases is ideal. In this case, the part is mounted in the direction of Surface Mount. There is a voltage of 9V~80V applied to it. The minimum operating temperature of this component must not be -40°C~85°C. It is suitable for the component connected in Automotive, Redundant Power Supplies, Telecom Infrastructure. As far as the device classification is concerned, it falls under the N+1 ORing Controller category. A N-Channel-type FET can be identified. 8 terminations are available in the part in order to meet your needs. Pins are attached to it using 8 pins. The part is based on LTC4357. Powered by 20V, it delivers high performance. The peak reflow temperature of this part is used to run 260 on it. There is a requirement that the supply current be run for the part at 500μA in order to complete the operation. The part is from Power Management Circuits family. There should be no less than 9V voltage supply for this part (Vsup). A maximum voltage supply (Vsup) is reached at 80V. Isup (supply current) should conduct under 1mA. There is a capability of delivering voltage at 9/80V when the transformer is in operation.
LTC4357IMS8#TRPBF Features
in a 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case
FET Type: N-Channel
8 terminations
Peak Reflow Temperature (Cel) : 260
LTC4357IMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4357IMS8#TRPBF Ideal Diode controller applications.
- Active OR-ing of Redundant (N+1) Power Supplies
- Automotive battery protection
- Digital Cameras
- Power supply reverse polarity protection
- Power Tools
- MP3 Players
- Cell phones
- Factory automation and control - PLC digital output modules
- Asset tracker
- PCs