LTC4314IGN#TRPBF
| Parameters | |
|---|---|
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Buffer, Multiplexer |
| Terminal Finish | Matte Tin (Sn) |
| Applications | I2C - Hotswap |
| HTS Code | 8542.39.00.01 |
| Technology | CMOS |
| Voltage - Supply | 2.9V~5.5V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 3.3V |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LTC4314 |
| Output | 2-Wire Bus |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 5.5V |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 x 1:4 |
| Adjustable Threshold | NO |
| Current - Supply | 7.3mA |
| Input | 2-Wire Bus |
| Data Rate (Max) | 400kHz |
| Capacitance - Input | 20pF |
| Height Seated (Max) | 1.75mm |
| Length | 8.64mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2010 |
LTC4314IGN#TRPBF Overview
For convenience, power buffer comes packaged in 20-SSOP (0.154, 3.90mm Width).It has been packaged in Tape & Reel (TR) packages and is ready for power buffer.Surface Mount A universal mout for easy adaptation to a wide range of heads.As for types, this is an example of a typical Buffer, Multiplexer.The op amp buffer uses a voltage of 2.9V~5.5V volts for its operation.In order to maintain a high standard of output, 1 x 1:4 channels cooperate together.As a result, it facilitates input of 2-Wire Bus.If you want to avoid malfunction, set the operating temperature to -40°C~85°C.The operational amplifier buffer is targeted at applications such as I2C - Hotswap and others.To find pin-to-pin solutions for your specific needs, try searching with "LTC4314."You can find 20 terminals of the op amp buffer.The peak reflow temperature of the material is NOT SPECIFIED.As the splitter is supplied by 3.3V voltage, it is capable of completing many demanding tasks in a short amount of time.The pinout of a Power buffer begins with the 20 pins of the Power buffer that it possesses.The output of this program is in 2-Wire Bus format.In other words, it is a 7.3mA op amp buffer.Repeters cannot be fed voltages higher than 5.5V.The splitter must have at least 2.9V to be able to start up.
LTC4314IGN#TRPBF Features
1 x 1:4 channels.
Mainly used in I2C - Hotswap.
LTC4314IGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LTC4314IGN#TRPBF Signal Buffers, Repeaters, Splitters applications.
- Industrial PCs
- Digital Crossconnects
- Data or Clock Signal Amplification
- Clock Distribution
- Cellular Phone Base Stations
- Digital Cross-Connects
- Laptop Computers (for External Video Cards)
- Multidrop Buses
- Medical
- Loopback