LTC4241IGN#PBF
| Parameters | |
|---|---|
| Qualification Status | Not Qualified |
| Supply Voltage-Max (Vsup) | 12.6V |
| Supply Voltage-Min (Vsup) | 11.4V |
| Number of Channels | 5 |
| Adjustable Threshold | NO |
| Supply Current-Max (Isup) | 8mA |
| Internal Switch(s) | Both |
| Programmable Features | Current Limit, Fault Timeout, Slew Rate |
| Feature Pins | AUXON, /FAULT, ON, /PWRGD, TIMER |
| Height Seated (Max) | 1.727mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2003 |
| JESD-609 Code | e3 |
| Feature | Latched Fault, Thermal Limit, UVLO |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller |
| Terminal Finish | Matte Tin (Sn) |
| Applications | PCI, PCI-X |
| Additional Feature | ALSO REQUIRES 3.3V AUXILIARY SUPPLY INPUT FOR POWERING THE AUXILIARY CONTROLLER INTERNAL CIRCUITRY |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 3.3V 5V ±12V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC4241 |
| Pin Count | 20 |
| JESD-30 Code | R-PDSO-G20 |
LTC4241IGN#PBF Overview
It's included in the 20-SSOP (0.154, 3.90mm Width) package.Currently, there are 5 channels accessible.A Tube-shaped package holds it.There are a total of 20 terminations on it.A device's terminal position is DUAL.In total, there are 20 pins on it.The supply voltage 12V is necessary for high efficiency.In the way of Surface Mount, it's set up.Hot-swappable device is classified as a Hot Swap Controller electrical component.To ensure reliable operation, the temperature should be set to -40°C~85°C.A PCI, PCI-X application is available for the device.Latched Fault, Thermal Limit, UVLO features it.The device should be able to be powered by a 3.3V 5V ±12VV power source.The number LTC4241 belongs to the LTC4241 family.Despite its self-contained nature, Power Management Circuits is a very compact device.The programmable features of this device are Current Limit, Fault Timeout, Slew Rate.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 11.4V in order to maintain normal operation.The maximum supply voltage is set to 12.6V.During operation, it can supply a maximum current of 8mA.This device can also be used to produce ALSO REQUIRES 3.3V AUXILIARY SUPPLY INPUT FOR POWERING THE AUXILIARY CONTROLLER INTERNAL CIRCUITRY as well.
LTC4241IGN#PBF Features
The terminal position of 20
Features of Latched Fault, Thermal Limit, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
LTC4241IGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4241IGN#PBF hot swap controllers applications.
- Network router
- Limitting the inrush current
- Network switches
- Disconnect faulty loads before supply voltage drops
- Loads
- Datacom
- Servers
- ISDN system
- Industrial
- Redundant Array of Disks (RAID)