LTC4232IDHC#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Feature | Thermal Limit |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Type | Hot Swap Controller, Monitor |
| Terminal Finish | Matte Tin (Sn) |
| Applications | General Purpose |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Voltage - Supply | 2.9V~15V |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 12V |
| Depth | 3mm |
| Base Part Number | LTC4232 |
| Pin Count | 16 |
| Supply Voltage-Min (Vsup) | 2.9V |
| Number of Channels | 1 |
| Current - Output (Max) | 5A |
| Adjustable Threshold | YES |
| Current - Supply | 1.6mA |
| Supply Current-Max (Isup) | 3mA |
| Internal Switch(s) | Yes |
| Programmable Features | Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO |
| Feature Pins | FB, /FLT, IMON, INTVCC, ISET, OV, PG, TIMER, UV |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC4232IDHC#PBF Overview
You get it with the 16-WFDFN Exposed Pad package.In the current state, 1 channels are accessible.In the form of a Tube, it is packaged.This device has a total of 16 terminations.Device DUAL is located at the terminal position.Hot-swappable device has a total of 16 pins on Hot-swappable device.High efficiency can be achieved by using 12V as supply voltage.There is a Surface Mount-like arrangement.This electrical component is classified as Hot Swap Controller, Monitor.If you want reliable performance, you should set the temperature to -40°C~85°C.There are General Purpose applications on the device.The article is featured in Thermal Limit.As long as you have a 2.9V~15VV power source, it should work.The number LTC4232 belongs to the LTC4232 family.For operation, 16 pins are used.This gadget is self-contained in?Power Management Circuits.Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO is the number of features it can be programmed with.Presently, there is a sufficient supply of 1.6mA.Hot-swappable device is recommended to keep the supply voltage (Vsup) above 2.9V so that the device can function normally.3mA is its maximum supply current.There is a maximum output of 5AV from the device.
LTC4232IDHC#PBF Features
The terminal position of 16
Features of Thermal Limit
Programmable features of Auto Retry, Current Limit, Fault Timeout, Latched Fault, OVP, UVLO
LTC4232IDHC#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC4232IDHC#PBF hot swap controllers applications.
- Safe board insertion and extraction
- Disconnect faulty loads before supply voltage drops
- Datacom
- Central office switching systems
- Server backplane system
- Thermal limitation
- USB interface
- Load transient protection
- Switch
- DC boost circuit