LTC3862HGN#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 4 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 24-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 24 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 24 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Frequency | 500kHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3862 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 2 |
| Output Voltage | 200V |
| Output Type | Transistor Driver |
| Max Output Current | 50mA |
| Input Voltage-Nom | 12V |
| Number of Channels | 1 |
| Analog IC - Other Type | DUAL SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 50mA |
| Voltage - Supply (Vcc/Vdd) | 4V~36V |
| Control Features | Enable, Frequency Control, Phase Control, Soft Start |
| Input Voltage (Min) | 4V |
| Topology | Boost, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 75kHz~500kHz |
| Input Voltage (Max) | 36V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Dropout Voltage | 5V |
| Switcher Configuration | PHASE-SHIFT |
| Duty Cycle (Max) | 96% |
| Clock Sync | Yes |
| Length | 8.649mm |
| Width | 3.899mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LTC3862HGN#PBF Overview
Capsuled in the 24-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. For 2 outputs, the dc motor controller is appropriate. Packaged in solid enclosures, this pmic has a Tube rating. With this function, you can deal with Transistor Driver dc switching's outputs (s). 4V~36V is the supply voltage and the operating voltage of the dc control. Worked in an dc switcher with a -40°C~150°C TJ rating. This switching controller can switch at 75kHz~500kHz. dc dc regulator is made easier with Surface Mount. Enable, Frequency Control, Phase Control, Soft Start provides dcdc regulator efficient switching control. An analog IC with the DUAL SWITCHING CONTROLLER signal is connected to the switch converters. The switching converters's terminal (s) are designed at DUAL . A variety of 24 terminations are available in dc switching. Some of the control techniques used by these dc dc converter ics are PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 12V. You can find other relevant dc to dc converter ics by searching "LTC3862". Total pins of switching converter are 24. Specifically, switching converter falls under the Switching Regulator or Controllers category. dc dc voltage regulators should have a minimum input voltage of 4V. According to the test statistics, DC regulator outputs 200V voltage. The dc to dc regulator can only accept a maximum input voltage of 36V. You should note that the dc dc regulator's usual output current is 50mA. Switching controller operates at a frequency of 500kHz. In this case, the dc switcher won't produce more than 50mA watts of output current. In order to ensure high-quality communication, there are 1 channels available.
LTC3862HGN#PBF Features
Transistor Driver Outputs
Switching Frequency: 75kHz~500kHz
Enable, Frequency Control, Phase Control, Soft Start
PULSE WIDTH MODULATION
Frequency: 500kHz
LTC3862HGN#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3862HGN#PBF DC to DC converter applications.
- Wind power
- ATMs
- Plate bending machines
- Printing
- Computer monitoring equipment of building
- Experimental setup
- Radio equipment
- CNC system
- Game consoles
- Energy management systems