LTC3703EGN-5#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 16 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Tube |
| Published | 2005 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3703 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Voltage | 60V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive |
| Output Current | 5A |
| Voltage - Supply (Vcc/Vdd) | 4.1V~15V |
| Control Features | Current Limit, Enable, Frequency Control, Soft Start |
| Max Output Voltage | 12V |
| Topology | Buck |
| Min Input Voltage | 9.3V |
| Control Mode | VOLTAGE-MODE |
| Frequency - Switching | 100kHz~600kHz |
| Max Input Voltage | 15V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Nominal Input Voltage | 60V |
| Min Output Voltage | 800mV |
| Switcher Configuration | PUSH-PULL |
| Max Frequency | 330kHz |
| Duty Cycle (Max) | 93% |
| Height | 1.95mm |
| Length | 10.5mm |
| Width | 5.6mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3703EGN-5#PBF Overview
This switching controller fits most application requirements since it is packaged in a 16-SSOP (0.154, 3.90mm Width) package. For outputs of 1, this dc motor controller is suitable. Packaged in solid enclosures, this pmic has a Tube rating. Transistor Driver dc switching's outputs (s) can be handled by it. This dc control has a supply voltage and operating voltage of 4.1V~15V. Work well in dc switchers with a -40°C~85°C TA. With this switching controller, you can switch at 100kHz~600kHz. dc dc regulator can be generalized using Surface Mount. Switching control is made easier with the dcdc regulator's Current Limit, Enable, Frequency Control, Soft Start. Thare switch converters are connected to an analog integrated circuit (IC) of type SWITCHING CONTROLLER. Switching converters are designed with the terminal (s) at position DUAL . 16 terminations with a variety of function. These dc dc converter ics adapt a variety of control techniques, including PULSE WIDTH MODULATION. The DC switcher's nominal voltage is 5V. You can find other relevant dc to dc converter ics by searching "LTC3703". There are a total of 16 pins on switching converter. Specially, switching converter corresponds to type Switching Regulator or Controllers. Statistically, DC regulator outputs 60V volts. The dc dc regulator's usual output current is 5A, which should be noted down when you start a project. DC regulators have a maximum frequency of 330kHz. For nominal working status, the input voltage can be set as 60V. In order to ensure the dc switcher's functionality, users must limit the voltage to 15V due to the dc switcher's maximum input voltage. 9.3V is the required supply voltage. At its maximum output, the switching converter can provide 12V volts. Its lowest voltage output is not less than 800mV.
LTC3703EGN-5#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~600kHz
Current Limit, Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LTC3703EGN-5#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC3703EGN-5#PBF DC to DC converter applications.
- Energy management systems
- Automatic plug-in machines
- Sink circuits
- Mobile phones
- Computed tomography (CT)
- Computer application technology
- SMT equipment
- Boring machines
- Lathes
- Low output voltage switching power supply circuits