LTC3405AES6#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C TA |
| Packaging | Cut Tape (CT) |
| Published | 2004 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC3405 |
| Function | Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Efficiency | 96 % |
| Output Voltage | 5.5V |
| Output Type | Adjustable |
| Max Output Current | 300mA |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 3.6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive |
| Max Output Voltage | 5.5V |
| Voltage - Output (Min/Fixed) | 0.8V |
| Topology | Buck |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 1.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Min Output Voltage | 800mV |
| Height | 900μm |
| Length | 2.9mm |
| Width | 1.75mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC3405AES6#TRMPBF Overview
A Cut Tape (CT) package is used in this voltage regulator to optimize performance. During the development of this harley voltage regulator, 6 terminations were made. As this regulator voltage is equipped with an analog IC of the type SWITCHING REGULATOR, it is a SWITCHING REGULATOR-type voltage regulator. In order to save space, this voltage regulator is packaged in the SOT-23-6 Thin, TSOT-23-6 package. In this case, DC DC switching regulator has 1 outputs configured to it. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. There is a switching regulator that is compatible with the Surface Mount mounting. Operating at -40°C~85°C TA is the recommended temperature for adjusting voltage regulator's operation. The switching frequency of this DC-DC switching regulator reaches 1.5MHz. The regulator is capable of operating with a dc to dc voltage regulator's minimum input voltage of 2.5V. In this adjusting voltage regulator, the output voltage (Min/Fixed) equates to 0.8V. This voltage regulator's peak reflow temperature is so high as to make it virtually indestructible. For operation, switching regulator requires a nominal input voltage of 3.6V. The regulator voltage that you are looking at belongs to the subcategory Switching Regulator or Controllers. DC/DC regulators such as this one belong to the LTC3405 family of products. At 5.5V volts, voltage regulator can provide voltage. In order to operate voltage regulator, 6 pins are required. As a general rule, this voltage regulator 12v should keep its output voltage at least at 800mV. A 300mA A maximum output current is required to meet the switching regulator operation requirements. As a result, it is able to provide adjusting voltage regulator a maximum output voltage of 5.5V.
LTC3405AES6#TRMPBF Features
1 outputs
Peak reflow temperature (Cel) of 260
6 pins
LTC3405AES6#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LTC3405AES6#TRMPBF Voltage Regulators applications.
- Smoke exhaust equipment
- Surface processing equipment
- Automatic plug-in machines
- Computed tomography (CT)
- Emergency lighting monitoring equipment
- Smart grid
- Laboratories
- PSRR circuits
- Automatic testing equipment
- Direct power supply system