LTC1686CS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Transceiver |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Line Driver or Receivers |
| Technology | CMOS |
| Voltage - Supply | 4.75V~5.25V |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1686 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Operating Supply Voltage | 5V |
| Power Supplies | 5V |
| Interface | RS-422, RS-485 |
| Nominal Supply Current | 12mA |
| Max Supply Current | 12mA |
| Data Rate | 52Mbps |
| Differential Output | YES |
| Protocol | RS422, RS485 |
| Input Characteristics | DIFFERENTIAL SCHMITT TRIGGER |
| Number of Drivers/Receivers | 1/1 |
| Driver Number of Bits | 1 |
| Receiver Number of Bits | 1 |
| Duplex | Full |
| Receiver Hysteresis | 25mV |
| Number of Transceivers | 1 |
| ESD Protection | Yes |
| Receive Delay-Max | 22 ns |
| Transmit Delay-Max | 22 ns |
| Output Low Current-Max | 0.004A |
| Height | 1.752mm |
| Length | 5mm |
| Width | 3.988mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1686CS8#PBF Overview
This driver chip is excellent for driving common LEDs due to its enhanced 8-SOIC (0.154, 3.90mm Width) package.This receiver is mounted in the Tube package.With its Transceiver can transceiver design, this part can be incorporated into a wide range of solutions.The wide receiver can be mounted on any Surface Mount-type PCB or development board.Power supply for this differential driver is 4.75V~5.25V.As many as 1/1 eligible receivers/drivers can be used simultaneously with this electronic part.Applications with operating temperatures of 0°C~70°C have been designed primarily for this ic receiver.5V is the supply voltage range that this line driver ic can efficiently operate with.Wide receiver has 8 terminations built in for driving or receiving signals from data.In this package, you will find 8 market-standard pinouts for this transceiver.Since the part number LTC1686 represents the product type, temperature, package, etc., you can try searching with that number to find more variants.It is a 8-pin driver IC with enhanced power dissipation controls.This package size decreases dramatically due to optical transceiver downsizing and high-density Surface Mount mounting technologies.Using this ic receiver, you were able to achieve a resolution of 1 bits.In the case of this receiver, a resolution of 1 bits is typically specified.There is a 5V input voltage supply that can be used to operate this transceiver module.Line Driver or Receivers is a subcategory of this rf transceiver module.The driver IC in this product is designed so that it can be powered by 5V.It implements 1 transceivers in total.Input currents exceeding 12mA may cause this can transceiver to malfunction.
LTC1686CS8#PBF Features
Tube package
8 pin count
8 pins
5V power supply
LTC1686CS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1686CS8#PBF Drivers/Receivers/Transceivers applications.
- Structural bonding
- Wireless network systems
- Car alarm systems
- Switches
- Low power, low voltage systems
- Wireless showroom
- Switching system
- Broadcast application
- Wireless interactive experience
- Shortwave receiver