LTC1478CS#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 16-SOIC (0.154, 3.90mm Width) |
| Number of Pins | 16 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1996 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Resistance | 70mOhm |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Peripheral Drivers |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1478 |
| Pin Count | 16 |
| Number of Outputs | 2 |
| Output Voltage | 7V |
| Max Output Current | 1A |
| Power Supplies | 3/5V |
| Number of Channels | 4 |
| Interface | On/Off |
| Nominal Supply Current | 120μA |
| Output Configuration | High Side |
| Power Dissipation | 70mW |
| Voltage - Supply (Vcc/Vdd) | Not Required |
| Input Type | Non-Inverting |
| Switch Type | General Purpose |
| Nominal Input Voltage | 5.5V |
| Ratio - Input:Output | 1:1 |
| Voltage - Load | 2.7V~5.5V |
| Driver Number of Bits | 2 |
| Fault Protection | Current Limiting (Fixed), Over Temperature |
| Output Peak Current Limit-Nom | 2.4A |
| Rds On (Typ) | 70m Ω |
| Drain to Source Resistance | 70mOhm |
| Built-in Protections | OVER CURRENT; THERMAL |
| Output Current Flow Direction | SINK |
| Height Seated (Max) | 1.75mm |
| Length | 9.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1478CS#PBF Overview
It is packaged in the form of a Tube.It is included in the package 16-SOIC (0.154, 3.90mm Width).A Surface Mount mounting is used for the LED driving board.There is a General Purpose switch type associated with it.It is best to set the temperature to 0°C~70°C TA to ensure reliable operation.By default, it is set to output 2.It uses a supply voltage of Not Required to operate.It belongs to the LTC1478 family.It contains 16 terminations.16 pins are used for operation.It has 1 functions.As a result, the maximum output current is reduced to 1A in order to meet the operation requirements.It is possible to achieve a high level of efficiency with a supply voltage of 5V.It is mounted in the way of Surface Mount.The LED driving board is equipped with a total of 16 pins.Currently, the LED driving board has 70mOhm resistance.A self-contained econtainer holding Peripheral Drivers capacity contains this lighting driver.To choose from, there are 4 channels.It has a power supply of 3/5V.
LTC1478CS#PBF Features
Supplied from 5V
Resistance of 70mOhm
4 channels
LTC1478CS#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1478CS#PBF Power Switches ICs applications.
- Notebook and Tablet Computers
- Hot Swap
- Solid State Drivers
- Mobile Communication Devices
- Notebook PC
- PC Cards
- Gaming
- Wireless Headsets
- Portable/Handheld Devices
- Storage Drives