LTC1440IDD#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-WFDFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tube |
| Published | 2006 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Voltage Reference |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 3V |
| Terminal Pitch | 0.5mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1440 |
| Pin Count | 8 |
| Output Type | CMOS, TTL |
| Number of Elements | 1 |
| Power Dissipation | 500mW |
| Output Current | 20μA |
| Propagation Delay | 15 μs |
| Quiescent Current | 4.4μA |
| Supply Current-Max | 0.0044mA |
| Response Time | 14000 ns |
| Common Mode Rejection Ratio | 80 dB |
| Voltage - Supply, Single/Dual (±) | 2V~11V ±1V~5.5V |
| Input Offset Voltage (Vos) | 10mV |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Neg Supply Voltage-Max (Vsup) | -0.3V |
| Current - Quiescent (Max) | 4.4μA |
| Voltage - Input Offset (Max) | 10mV @ 5V |
| Hysteresis | 50mV |
| CMRR, PSRR (Typ) | 80dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 40mA |
| Length | 3mm |
| Width | 3mm |
| Radiation Hardening | No |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1440IDD#PBF Overview
In order to make transportation easier, it is packaged in 8-WFDFN Exposed Pad .A comparator with an output type of CMOS, TTL is being used.Electronic comparator is shipped by Tube .You can find 8 terminals of the comparator.Electronic comparator is a component of the Comparator family.The comparator is capable of achieving many demanding tasks when supplied with 3V voltage.The type of the chip can be classified as with Voltage Reference .In total, it contains 1 elements.The device is equipped with 8 pins.Electronic comparator is recommended to mount the device using type Surface Mount .The operating temperature should be set to -40°C~85°C to avoid mal-function.The comparator is equipped with 8 pins.You can find more pin-to-pin solutions by searching LTC1440 .The comparator presents a quiescent current of 4.4μA volts.The maximum current that can be supplied to this part is 0.0044mA .
LTC1440IDD#PBF Features
CMOS, TTL output capability
with Voltage Reference IC
Employing 1 elements
Operates under -40°C~85°C
Quiescent Current: 4.4μA
LTC1440IDD#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1440IDD#PBF linear comparators applications.
- Alarm and Monitoring Circuits
- Point of load regulators
- Window Comparators
- Industrial
- Zero-Crossing Detectors
- Building automation
- RC Timers
- Power management
- Hand-Held Electronics
- Analog front end