LTC1326CMS8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C TA |
| Packaging | Tube |
| Published | 1998 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | Multi-Voltage Supervisor |
| Terminal Finish | Matte Tin (Sn) |
| Additional Feature | RESET THRESHOLD VOLTAGE IS 4.725; MANUAL PUSH-BUTTON RESET INPUT |
| Subcategory | Power Management Circuits |
| Technology | CMOS |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 3 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LTC1326 |
| Output | Open Drain or Open Collector |
| Pin Count | 8 |
| Number of Channels | 3 |
| Max Supply Voltage | 7V |
| Min Supply Voltage | 1V |
| Nominal Supply Current | 20μA |
| Max Supply Current | 40μA |
| Adjustable Threshold | NO |
| Watchdog Timer | No |
| Reset | Active High/Active Low |
| Voltage - Threshold | 3.118V 4.725V Adj |
| Number of Voltages Monitored | 3 |
| Reset Timeout | 140ms Minimum |
| Min Reset Threshold Voltage | 4.625V |
| Max Reset Threshold Voltage | 4.762V |
| Threshold Voltage | 1.03.1184.725V |
| Height | 860μm |
| Length | 3mm |
| Width | 3mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LTC1326CMS8#PBF Overview
There are 8 terminals connected to this power management, which makes it easy to mount. Power management is packaged in a Tube way. In this PMIC, you can find 3 functions for your reference. On this supervisor, there is a series of 3 channels that can be found. Please refer to power management for 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) functions. It is a IC power that shares many benefits with other products from the Multi-Voltage Supervisor line. Specifies a reflow peak temperature of 260 for the package during reflow. IC management conducts in a 5V-voltage supply. During operation, the power ic is supplied with a voltage of 3. The power management belongs to the Power Management Circuits subcategory. The total number of pins on this power management is 8. 8 pins make up the power management. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 7V volts. Mounting type Surface Mount is recommended. The temperature of the supervisors should be set to this range: 0°C~70°C TA. While this power management is operating, it will output Open Drain or Open Collector as the output voltage. There are other features such as RESET THRESHOLD VOLTAGE IS 4.725; MANUAL PUSH-BUTTON RESET INPUT to name a few. For similar manage ics search of the manufacturer, you can always refer to LTC1326, the base PMIC number. The power management can work with a maximum supply temperature of 40μA.
LTC1326CMS8#PBF Features
Multi-Voltage Supervisor type
Minimum supply voltage of 1V
LTC1326CMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LTC1326CMS8#PBF Voltage Supervisors applications.
- FPGA design
- Precision measurement
- Stable power system
- Microprocessor system
- Personal computers
- Electronics installed in the vehicle
- Power communication system
- Low voltage/high power - AI, GPU
- Computer applications
- Important electronics for automotive protection