LT6350IMS8#PBF
| Parameters | |
|---|---|
| Average Bias Current-Max (IIB) | 2.6μA |
| Low-Offset | NO |
| Supply Voltage Limit-Max | 12.6V |
| Micropower | NO |
| -3db Bandwidth | 33MHz |
| Programmable Power | NO |
| Input Offset Voltage-Max | 1360μV |
| Wideband | YES |
| Common-mode Reject Ratio-Min | 93 dB |
| Height Seated (Max) | 1.1mm |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | ADC Driver |
| Terminal Finish | Matte Tin (Sn) |
| Applications | Data Acquisition |
| HTS Code | 8542.39.00.01 |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Base Part Number | LT6350 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Operating Temperature (Max) | 85°C |
| Operating Temperature (Min) | -40°C |
| Temperature Grade | INDUSTRIAL |
| Supply Current-Max | 8.3mA |
| Slew Rate | 48 V/us |
| Architecture | VOLTAGE-FEEDBACK |
| Common Mode Rejection Ratio | 118 dB |
| Unity Gain BW-Nom | 115000 kHz |
LT6350IMS8#PBF Overview
The package consists of a Tube shape.This is a great ADC Driver that is very good value for money.In order to use the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package, you will need the following.As part of the mounting process, the part needs to be mounted in the Surface Mount direction in order to be positioned in the right place.Data Acquisition is the main application in which it is found.The device's base part number is LT6350.There are two 1 functions here that are used to gain access to high performance for amplification purposes.It is worth noting that there are 8 terminals in total, each having its own function.As a whole, there are a total of six 8 pins on the part.It is recommended to use a supply voltage of 5V in order to fully run this amplifier.Using this part will cause you to reach 85°C, which is its maximum operating temperature.If the temperature fall below -40°C, the device could present malfunctions.In terms of bandwidth performance, it has a -3db rating of 33MHz.Supply current should be monitored and not be allowed to exceed 8.3mA.
LT6350IMS8#PBF Features
LT6350IMS8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT6350IMS8#PBF Special Purpose Amplifiers applications.
- Oscilloscopes
- Multiplication and division circuits
- Multimedia playback equipment
- Weighing systems
- Signal operation
- ECG equipment
- High speed sample
- Tablets
- E-book readers
- Radiation thermometry transducers