LT6200IS6-5#TRMPBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | SOT-23-6 Thin, TSOT-23-6 |
| Surface Mount | YES |
| Number of Pins | 6 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.95mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT6200 |
| Pin Count | 6 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Power Supplies | 3/5/+-5V |
| Operating Supply Current | 20mA |
| Supply Current-Max | 29mA |
| Slew Rate | 250V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | Buffer |
| Common Mode Rejection Ratio | 65 dB |
| Current - Input Bias | 23μA |
| Voltage - Supply, Single/Dual (±) | 2.5V~12.6V ±1.25V~6.3V |
| Output Current per Channel | 90mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 800MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 800000 kHz |
| Voltage Gain | 101.58dB |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 2.5mV |
| Low-Bias | NO |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 750MHz |
| Wideband | YES |
| Length | 2.9mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT6200IS6-5#TRMPBF Overview
There is a SOT-23-6 Thin, TSOT-23-6 case in which the instrumentation amplifier is packaged. An op amp of this type is a Buffer-type. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. In recent months, the number of terminations has approached 6. A total of 6 pins are located on this board. As a reminder, this buffer op amp should be powered by 5V battery and that the battery should be inserted in the amplifier. A type of Operational Amplifier buffer op amp is what this device is specifically, to be more precise. Linear amplifier includes 6 pins. The input offset voltage is 1mV. This electronic part is recommended for mounting type Surface Mount. The buffer amplifier functions well at -40°C~85°C as far as operating temperature is concerned. Using a supply current of 20mA , this buffer op amp will be able to operate. There should be no change in the voltage gain. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. According to the specifications of the buffer op amp, the operating supply voltage is rated at 1. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps.
LT6200IS6-5#TRMPBF Features
6 Pins
supply voltage of 5V
101.58dB voltage gain
Output Type: Rail-to-Rail
LT6200IS6-5#TRMPBF Applications
There are a lot of Linear Technology/Analog Devices LT6200IS6-5#TRMPBF Instrumentational OP Amps applications.
- Semiconductor detectors
- Proportional operation circuits
- Industrial applications including automation
- Weighing systems
- E-book readers
- Micro signal measurement
- pH (acidity)
- Logarithmic operation circuits
- Medical instruments
- High gain DC amplifier