LT3758AIMSE#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Mounting Type | Surface Mount |
| Package / Case | 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 10 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 10 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.5mm |
| Base Part Number | LT3758 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Output Voltage | 7.2V |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 24V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative, Isolation Capable |
| Output Current | 25A |
| Voltage - Supply (Vcc/Vdd) | 5.5V~100V |
| Control Features | Enable, Frequency Control, Soft Start |
| Input Voltage (Min) | 5.5V |
| Topology | Boost, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 100kHz~1MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Max Frequency | 1MHz |
| Clock Sync | Yes |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT3758AIMSE#PBF Overview
The switching controller fits in the 10-TFSOP, 10-MSOP (0.118, 3.00mm Width) Exposed Pad package and is ideal for most applications. 1 outputs are supported by the dc motor controller. Tube is the solid enclosure in which PMIC is packaged. There are Transistor Driver dc switching's output (s) that it can handle. DC control operates at 5.5V~100V volts and has 5.5V~100V supply voltage. Qualified to work in a -40°C~125°C TJ dc switcher. In this switching controller, the switch can be set to 100kHz~1MHz. The Surface Mount value makes it suitable for general dc dc regulator. Enable, Frequency Control, Soft Start is used for efficient switching control in the dcdc regulator. Switch converters are connected to ICs with SWITCHING REGULATOR analog outputs. The switching converters's terminals (s) are designed at DUAL. Various 10 terminations. PULSE WIDTH MODULATION is an example of one of the control techniques these dc dc converter ics adapt. 24V nominal DC switcher's voltage input. LT3758 can be used to locate other relevant dc to dc converter ics. In total, switching converter has 10 pins. Input voltage of dc dc voltage regulator should be 5.5V. A 7.2V voltage of DC regulator was detected in the test statistics. The dc dc regulator's usual output current is 25A, which should be noted down when you start a project. DC regulators have a maximum frequency of 1MHz.
LT3758AIMSE#PBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~1MHz
Enable, Frequency Control, Soft Start
PULSE WIDTH MODULATION
LT3758AIMSE#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3758AIMSE#PBF DC to DC converter applications.
- Radio equipment
- Serial communication converter
- Printing
- Automatic testing equipment
- Wind power
- Electric heating, lighting
- Electric water heaters
- Production lines
- Surface processing equipment
- Magnetohydrodynamic power