LT3599IUH#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 3 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 32-WFQFN Exposed Pad |
| Surface Mount | YES |
| Number of Pins | 32 |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tube |
| Published | 2010 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 32 |
| ECCN Code | EAR99 |
| Type | DC DC Regulator |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Display Drivers |
| Technology | BIPOLAR |
| Terminal Position | QUAD |
| Terminal Form | NO LEAD |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.5mm |
| Frequency | 200kHz~2.1MHz |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT3599 |
| Pin Count | 32 |
| Number of Outputs | 4 |
| Qualification Status | Not Qualified |
| Power Supplies | 5V |
| Max Supply Voltage | 30V |
| Min Supply Voltage | 3V |
| Output Current | 120mA |
| Voltage - Output | 44V |
| Topology | Step-Up (Boost) |
| Min Input Voltage | 3V |
| Max Input Voltage | 30V |
| Internal Switch(s) | Yes |
| Dimming | Analog, PWM |
| Number of Segments | 40 |
| Switching Frequency | 2.06MHz |
| Voltage - Supply (Min) | 2.7V |
| Multiplexed Display Capability | NO |
| Height Seated (Max) | 0.8mm |
| Length | 5mm |
| Width | 5mm |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
LT3599IUH#PBF Overview
Space is saved using its 32-WFQFN Exposed Pad package. In this LED driver, there are 4 outputs.It is possible to mount the led driver using Surface Mount.There is no doubt that this is a very efficient and reliable DC DC Regulator.It is capable of operating at a temperature of -40°C~125°C TJ. It operates based on the frequency of 200kHz~2.1MHz.The terminations 32 are designed for its operation.There are 32 pins on its base.A voltage supply less than 2.7V will cause undetermined failures.There are estimated to be 40 segments.The base part number for this LED driver is LT3599.It is acceptable for the voltage to be 30V.A 44V volt output voltage is provided by this device.The device has a pin count of 32.It is also classified into Display Drivers according to its characteristics.The input voltage must be minimally 3V.The system operates at a minimum supply voltage of 3V in order to achieve maximum efficiency.There is 30V maximum value for supply current.Loads can only be powered by 120mA current.This electronic component can fully perform when the switching frequency is 2.06MHz.
LT3599IUH#PBF Features
Available in the 32-WFQFN Exposed Pad package
Operating temperature of -40°C~125°C TJ
Frequency of 200kHz~2.1MHz
Supply voltage of 5V
Switching frequency of 2.06MHz
LT3599IUH#PBF Applications
There are a lot of Linear Technology/Analog Devices LT3599IUH#PBF LED Driver ICs applications.
- High-end retail lighting
- OLED power supply for portable equipment
- Sports Facility Lighting
- Replacement lamps
- LED backlight driver for LCD displays for Tablets and Note PCs
- LED Lighting PFCs, Linear Dimmable
- Ultraviolet (UV) and Infrared (IR) Irradiation Devices
- Linear fluorescent
- Other Electronic Devices
- Amusement Machines