LT3579IFE-1#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 20-TSSOP (0.173, 4.40mm Width) Exposed Pad |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 20 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Terminal Pitch | 0.65mm |
| Base Part Number | LT3579 |
| JESD-30 Code | R-PDSO-G20 |
| Function | Step-Up, Step-Up/Step-Down |
| Number of Outputs | 1 |
| Voltage - Input (Max) | 16V |
| Output Type | Adjustable |
| Voltage - Input (Min) | 2.5V |
| Input Voltage-Nom | 5V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Output Configuration | Positive or Negative |
| Current - Output | 6A Switch |
| Voltage - Output (Min/Fixed) | 1.215V |
| Topology | Boost, Charge Pump, Cuk, Flyback, SEPIC |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 200kHz~2.5MHz |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | No |
| Voltage - Output (Max) | 42V Switch |
| Length | 6.5mm |
| Width | 4.4mm |
| RoHS Status | ROHS3 Compliant |
LT3579IFE-1#TRPBF Overview
Using the Tape & Reel (TR) package, this voltage regulator optimizes the performance of the voltage regulator 12v. A voltage regulator consists of 20 terminations. A SWITCHING REGULATOR type of analog IC is equipped with this regulator voltage, which is the type of analog IC that is used in it. In order to save space, this voltage regulator is packaged in the 20-TSSOP (0.173, 4.40mm Width) Exposed Pad package. There are 1 outputs configured on the voltage regulator. Adjustable outputs are generated on the output pins of this adjusting voltage regulator. This voltage regulator 12v fits the Surface Mount mounting. Operating at -40°C~125°C TJ is the recommended temperature for adjusting voltage regulator's operation. 200kHz~2.5MHz is the switching frequency of this DC-DC switching regulator. There is no dc to dc voltage regulator's minimum input voltage requirement for this regulator. According to the table below, DC DC switching regulator's output voltage (Min/Fixed) is equal to 1.215V. It features maximum design flexibility due to dc to dc voltage regulator's 6A Switch output current. Voltage regulator's input voltage can reach 16V. In order to meet the operation requirements,voltage regulator is designed to provide a nominal input voltage of 5V. DC DC switching regulator is part of the Switching Regulator or Controllers subcategory and can be found in the Switching Regulator or Controllers category. DC/DC regulators of this type are part of the LT3579 family of voltage regulator 12vs. Based on the maximal adjusting voltage regulator's output voltage of 42V Switch, adjusting voltage regulator can be operated easily.
LT3579IFE-1#TRPBF Features
1 outputs
LT3579IFE-1#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT3579IFE-1#TRPBF Voltage Regulators applications.
- Domestic water pumps
- Handheld GPS
- Hydraulic presses
- Terrestrial set-top boxes
- Emergency lighting monitoring equipment
- Computed tomography (CT)
- Surge protection circuits
- Communication system
- Imported equipment
- Grinders