LT1999CS8-10#PBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 3 months ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Resistance | 20MOhm |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 5V |
| Number of Elements | 2 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 5.5V |
| Min Supply Voltage | 4.5V |
| Operating Supply Current | 5.8mA |
| Slew Rate | 3 V/μs |
| Common Mode Rejection Ratio | 120 dB |
| Current - Input Bias | 137.5μA |
| Output Current per Channel | 40mA |
| Input Offset Voltage (Vos) | 500μV |
| Bandwidth | 2MHz |
| Voltage Gain | 20.04dB |
| Power Supply Rejection Ratio (PSRR) | 68dB |
| -3db Bandwidth | 2MHz |
| Nominal Gain Bandwidth Product | 2MHz |
| Number of Amplifiers | 2 |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LT1999CS8-10#PBF Overview
In order to protect the op amps, a SOIC case is used. 8 pins are located on the operational amplifiers. With regard to input offset voltage, instrumentation amplifier is rated at 500μV. Using an 5.8mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 20.04dB at all times. During the manufacturing process, this buffer amplifier is divided into 1 circuits. Instrumentation amplifier has 1 channels on it. In order for this buffer op amp to function, it should have a temperature of at least 0°C degrees Celsius. Linear amplifier shouldn't be used above 70°C degrees. Depending on the chip's operating supply voltage, op amp ic has a rated voltage of 2. The operating supply voltage of the buffer op amp is rated at 5V. I would like to point out that this electrical component is capable of working from a voltage below 5.5V as far as the power supply is concerned. It is advised to keep the op amp's supply voltage higher than 4.5V. Linear amplifier resistance should stay within the range of 20MOhm. The buffer amplifier consists of 2 amplifiers.
LT1999CS8-10#PBF Features
20.04dB voltage gain
Resistance of 20MOhm
LT1999CS8-10#PBF Applications
There are a lot of Analog Devices, Inc. LT1999CS8-10#PBF Instrumentational OP Amps applications.
- Radiation thermometry transducers
- Differentiator circuits
- Home audio systems
- Integrator circuits
- Vehicle electronics
- Non-polarized electrodes
- Information processing
- Signal amplification
- Thermocouples
- Multiplication circuits