LT1952EGN#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 16 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 16-SSOP (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~125°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 16 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Switching Regulator or Controllers |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Terminal Pitch | 0.635mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1952 |
| Function | Step-Up/Step-Down |
| Number of Outputs | 1 |
| Qualification Status | Not Qualified |
| Output Type | Transistor Driver |
| Input Voltage-Nom | 15V |
| Analog IC - Other Type | SWITCHING CONTROLLER |
| Output Configuration | Positive, Isolation Capable |
| Voltage - Supply (Vcc/Vdd) | 9.25V~25V |
| Control Features | Enable, Frequency Control |
| Input Voltage (Min) | 9.25V |
| Topology | Forward Converter |
| Control Mode | CURRENT-MODE |
| Output Current-Max | 1A |
| Frequency - Switching | 100kHz~500kHz |
| Input Voltage (Max) | 25V |
| Control Technique | PULSE WIDTH MODULATION |
| Synchronous Rectifier | Yes |
| Switcher Configuration | SINGLE |
| Duty Cycle (Max) | 90% |
| Length | 4.89mm |
| Width | 3.899mm |
| RoHS Status | ROHS3 Compliant |
LT1952EGN#TRPBF Overview
Capsuled in the 16-SSOP (0.154, 3.90mm Width) package, the switching controller can be used for a wide range of applications. This dc motor controller can be used to generate outputs with 1 numbers. Tape & Reel (TR) solid enclosure protects the pmic. A total of Transistor Driver dc switching's outputs can be handled by it. This dc control has a supply voltage and operating voltage of 9.25V~25V. Worked in an dc switcher with a -40°C~125°C TJ rating. It can switch at 100kHz~500kHz. Surface Mount makes it suitable for general dc dc regulator. In order to control switching efficiently, the dcdc regulator features Enable, Frequency Control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Thare switching converters has a terminal (s) at DUAL . An array of 16 terminations of dc switching. A few of the control techniques these dc dc converter ics adapt include PULSE WIDTH MODULATION. A DC switcher's nominal voltage of 15V is input. You can find other relevant dc to dc converter ics by searching "LT1952". The type is a particular Switching Regulator or Controllers of switching converter. Input voltage of dc dc voltage regulator should be 9.25V. A maximum voltage of 25V is accepted by the dc to dc regulator as an input voltage. The output value is set to the greatest value of 1A.
LT1952EGN#TRPBF Features
Transistor Driver Outputs
Switching Frequency: 100kHz~500kHz
Enable, Frequency Control
PULSE WIDTH MODULATION
LT1952EGN#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1952EGN#TRPBF DC to DC converter applications.
- Sensitive electronic devices
- Overvoltage protection circuits in TV sets
- Boring machines
- Computer rooms
- Product testing
- Wide-range voltage regulation circuits
- Window air conditioners
- Linear guide
- Post equipment
- Automatic plug-in machines