LT1809IS6#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | SOT-23-6 |
| Number of Pins | 6 |
| Packaging | Tape & Reel (TR) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 1 |
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 15mA |
| Slew Rate | 300 V/μs |
| Common Mode Rejection Ratio | 66 dB |
| Current - Input Bias | 12.5μA |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 2.5mV |
| Gain Bandwidth Product | 160MHz |
| Voltage Gain | 98.06dB |
| Power Supply Rejection Ratio (PSRR) | 71dB |
| Max Dual Supply Voltage | 6.3V |
| -3db Bandwidth | 320MHz |
| Min Dual Supply Voltage | 1.25V |
| Nominal Gain Bandwidth Product | 160MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1809IS6#TRPBF Overview
Packaging for the buffer amplifier is in the form of a SOT-23-6 case. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. An 6-pin op amp ic is included in the package. With regard to input offset voltage, instrumentation amplifier is rated at 2.5mV. This op amp can operate from a supply current at 15mA. 98.06dB should be the voltage gain. There are 1 circuits on op amps. As far as the device is concerned, buffer amplifier has 1 channels. This op amp needs to be operated at a temperature of not less than -40°C degrees Celsius in order to function properly. In order to avoid damage to the product, operational amplifiers should only be used at temperatures below 85°C. As a whole, there are 1 elements that make up this buffer amplifier. With regard tp supply voltage, op amp is used under 12.6V. Over 2.5V is a recommended supply voltage for buffer ampsThis electronic part should be conducted with a dual supply voltage of 6.3V volts for this part.
LT1809IS6#TRPBF Features
98.06dB voltage gain
LT1809IS6#TRPBF Applications
There are a lot of Analog Devices, Inc. LT1809IS6#TRPBF Instrumentational OP Amps applications.
- Polarized electrodes
- Subtraction operation circuits
- Multimedia playback equipment
- Proportional operation circuits
- Video amplifiers
- Integrator circuits
- High-frequency data acquisition systems
- Non-polarized electrodes
- RF cable systems
- Portable electronic products powered by batteries