LT1806CS8#PBF
| Parameters | |
|---|---|
| Number of Channels | 1 |
| Number of Circuits | 1 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.5V |
| Operating Supply Current | 11mA |
| Slew Rate | 125 V/μs |
| Common Mode Rejection Ratio | 79 dB |
| Current - Input Bias | 5μA |
| Output Current per Channel | 85mA |
| Input Offset Voltage (Vos) | 550μV |
| Bandwidth | 325MHz |
| Gain Bandwidth Product | 325MHz |
| Voltage Gain | 106.85dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.25V |
| Dual Supply Voltage | 5V |
| Nominal Gain Bandwidth Product | 325MHz |
| Number of Amplifiers | 1 |
| Height | 1.48mm |
| Length | 5mm |
| Width | 3.99mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
| Lifecycle Status | PRODUCTION (Last Updated: 1 week ago) |
| Package / Case | SOIC |
| Number of Pins | 8 |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Operating Supply Voltage | 12V |
| Number of Elements | 1 |
LT1806CS8#PBF Overview
It is packaged in an SOIC-case that protects the operational amplifiers from damage. It has 8 pins that make up the linear amplifier. Regarding input offset voltage, op amp rates 550μV. A supply current of 11mA can be used to operate this linear amplifier. Op amp is a member of the 106.85dB's 106.85dB family. On this buffer amplifier, there are 1 circuits. Op amp ic has 1 channels. This instrumentation amplifier cannot operate below 0°C degrees Celsius. Use op amps only at temperatures no higher than 70°C. There are 1 elements in this buffer amplifier. The operating supply voltage of instrumentation amplifier is rated 12V voltage. The electrical part is capable of being powered by a voltage of under 12.6V, which means that it can be used with any voltage supply. Over 2.5V is a recommended supply voltage for buffer ampsThere should be a dual supply voltage of 6.3V for you to conduct this electrical part. A linear amplifier such as this has 1 amplifiers on it.
LT1806CS8#PBF Features
106.85dB voltage gain
LT1806CS8#PBF Applications
There are a lot of Analog Devices, Inc. LT1806CS8#PBF Instrumentational OP Amps applications.
- pH (acidity)
- Industrial control system
- Professional videography
- Communication
- Car stereo
- Comparator
- Medical instruments
- Automotive sensors
- E-book readers
- Test equipment