LT1801IMS8#TRPBF
| Parameters | |
|---|---|
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Package / Case | MSOP |
| Number of Pins | 8 |
| Packaging | Tape & Reel (TR) |
| Max Operating Temperature | 85°C |
| Min Operating Temperature | -40°C |
| Number of Elements | 2 |
| Number of Channels | 2 |
| Number of Circuits | 2 |
| Max Supply Voltage | 12.6V |
| Min Supply Voltage | 2.3V |
| Operating Supply Current | 1.8mA |
| Slew Rate | 25 V/μs |
| Common Mode Rejection Ratio | 85 dB |
| Current - Input Bias | 400nA |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 350μV |
| Gain Bandwidth Product | 70MHz |
| Voltage Gain | 98.59dB |
| Power Supply Rejection Ratio (PSRR) | 78dB |
| Max Dual Supply Voltage | 6.3V |
| Min Dual Supply Voltage | 1.15V |
| Nominal Gain Bandwidth Product | 80MHz |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LT1801IMS8#TRPBF Overview
A MSOP case is used to package the op amp. Upon delivery, op amp ic is packaged in a Tape & Reel (TR) case. It has 8 pins that make up the linear amplifier. Op amp rates 350μV as input offset voltage. The buffer amplifier is capable of operating from a supply current of 1.8mA . Maintain 98.59dB as the voltage gain. On this buffer amplifier, there are 2 circuits. The op amp ic has 2 channels on it. In order for op amp to function properly, the temperature should not be lower than -40°C degrees Celsius. No temperature greater than 85°C should be used. 2 elements make up the design of this buffer amplifier. This electric component can work from a voltage of under 12.6V as far as supply voltage is concerned. To keep the buffer amps' supply voltage higher than 2.3V. As a general rule, you should conduct this electronic component under dual supply voltages of 6.3V volts.
LT1801IMS8#TRPBF Features
98.59dB voltage gain
LT1801IMS8#TRPBF Applications
There are a lot of Analog Devices, Inc. LT1801IMS8#TRPBF Instrumentational OP Amps applications.
- Micro signal measurement
- Vehicle electronics
- Signal transformation
- single/dual op amp sum and difference circuits
- Proportional counter tubes
- Scintillation detectors
- Semiconductor detectors
- Band-pass filter
- High gain DC amplifier
- Digital cameras