LT1724CS#PBF

LT1724CS#PBF

4 Channels 50mA per Channel 40nA 80 dB Instrumentational OP Amps 6.3V SOIC


  • Manufacturer: Analog Devices, Inc.
  • Origchip NO: 84-LT1724CS#PBF
  • Package: SOIC
  • Datasheet: PDF
  • Stock: 906
  • Description: 4 Channels 50mA per Channel 40nA 80 dB Instrumentational OP Amps 6.3V SOIC(Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 3 months ago)
Package / Case SOIC
Number of Pins 14
Max Operating Temperature 85°C
Min Operating Temperature 0°C
Operating Supply Voltage 6.3V
Number of Elements 4
Number of Channels 4
Number of Circuits 4
Max Supply Voltage 12.6V
Min Supply Voltage 4.6V
Operating Supply Current 3.7mA
Slew Rate 70 V/μs
Common Mode Rejection Ratio 80 dB
Current - Input Bias 40nA
Output Current per Channel 50mA
Input Offset Voltage (Vos) 400μV
Bandwidth 200MHz
Gain Bandwidth Product 200MHz
Voltage Gain 80dB
Power Supply Rejection Ratio (PSRR) 78dB
Max Dual Supply Voltage 6.3V
Min Dual Supply Voltage 1.15V
Nominal Gain Bandwidth Product 200MHz
Number of Amplifiers 4
REACH SVHC No SVHC
RoHS Status RoHS Compliant

LT1724CS#PBF Overview


The linear amplifier is packaged in a SOIC case. 14 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 400μV. Using an 3.7mA supply current, this operational amplifier ics can be operated. It is recommended to keep the voltage gain at 80dB at all times. On this instrumentation amplifier, there are 4 circuits that are connected together. On the buffer amps, there are 4 channels that can be used. In order for op amp to function properly, the temperature should not be lower than 0°C degrees Celsius. It is recommended that op amp be used at temperatures below 85°C. There is a rating of 4 for the operating supply voltage of the buffer op amp. The operating supply voltage of the buffer op amp is rated at 6.3V. When it comes to the voltage from which this electrical part will operate, it can operate at a maximum of less than 12.6V. The linear amplifier's supply voltage should be higher than 4.6V. Conduct linear amplifier under the dual suuply voltage of 6.3V. A linear amplifier such as this has 4 amplifiers on it.

LT1724CS#PBF Features


80dB voltage gain

LT1724CS#PBF Applications


There are a lot of Analog Devices, Inc. LT1724CS#PBF Instrumentational OP Amps applications.

  • Band-pass filter
  • Instrumentation
  • Weighing systems
  • MP3
  • Weak signal detection
  • Gaming industry
  • Video data acquisition
  • Fission chambers
  • Biopotential
  • Switching amplifier

Write a review

Note: HTML is not translated!
    Bad           Good