LT1713IMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | UltraFast™ |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | with Latch |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1713 |
| Pin Count | 8 |
| JESD-30 Code | S-PDSO-G8 |
| Qualification Status | Not Qualified |
| Output Type | CMOS, Complementary, Rail-to-Rail, TTL |
| Number of Elements | 1 |
| Supply Current-Max | 9mA |
| Response Time | 9 ns |
| Voltage - Supply, Single/Dual (±) | 2.4V~12V ±2.4V~6V |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Average Bias Current-Max (IIB) | 5μA |
| Supply Voltage Limit-Max | 6.3V |
| Neg Supply Voltage-Max (Vsup) | -6.3V |
| Current - Quiescent (Max) | 7.5mA |
| Voltage - Input Offset (Max) | 4mV @ 5V |
| Current - Input Bias (Max) | 2μA @ 5V |
| CMRR, PSRR (Typ) | 70dB CMRR, 80dB PSRR |
| Current - Output (Typ) | 20mA |
| Propagation Delay (Max) | 11ns |
| Length | 3mm |
| Width | 3mm |
| RoHS Status | ROHS3 Compliant |
LT1713IMS8#TRPBF Overview
In order to make transportation easier, it is packaged in 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) .Output type CMOS, Complementary, Rail-to-Rail, TTL is used for this comparator.As a result, it is designed with Tape & Reel (TR) package.There are8 terminals on the comparator.The electrical component in this case belongs to the Comparator family.With a 5V voltage supply, the comparator can perform multiple demanding tasks.In terms of type, this is a typical with Latch comparator.This element consists of 1 elements in total.The device is equipped with 8 pins.Electronic comparator is recommended that you mount the device using type Surface Mount .Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.Alternatively, you may search for LT1713 to find more pin-to-pin solutions for your specific needs.The part can be supplied with a minimum current of 9mA .The part belongs to the UltraFast? series of comparator parts.
LT1713IMS8#TRPBF Features
CMOS, Complementary, Rail-to-Rail, TTL output capability
with Latch IC
Employing 1 elements
Operates under -40°C~85°C
LT1713IMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1713IMS8#TRPBF linear comparators applications.
- General-Purpose, Low-Voltage Applications
- Threshold Detectors
- High-Speed Differential Line Receiver
- RC Timers
- Power management
- Consumer Medical Electronics
- Window Comparators, Multivibrators
- Metering Systems
- Point of load regulators
- Window Comparators