LT1494CMS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 12 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tape & Reel (TR) |
| Published | 2001 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 0.65mm |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1494 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 1 |
| Number of Circuits | 1 |
| Operating Supply Current | 1.4μA |
| Supply Current-Max | 0.0024mA |
| Slew Rate | 0.001V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 90 dB |
| Current - Input Bias | 25pA |
| Voltage - Supply, Single/Dual (±) | 2.2V~36V ±1.1V~18V |
| Output Current per Channel | 1.5mA |
| Input Offset Voltage (Vos) | 150μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 2.7 kHz |
| Voltage Gain | 113.98dB |
| Power Supply Rejection Ratio (PSRR) | 90dB |
| Low-Offset | YES |
| Frequency Compensation | YES |
| Voltage - Input Offset | 200μV |
| Low-Bias | NO |
| Micropower | YES |
| Bias Current-Max (IIB) @25C | 0.36μA |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 2.7 kHz |
| Wideband | NO |
| Length | 3mm |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1494CMS8#TRPBF Overview
A 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) case is used to package the op amp. The instrumentation amplifier in this picture is of the General Purpose-type. Instrumentation amplifier is delivered in a Tape & Reel (TR) case. The number of terminations approaches 8. Buffer amplifier has a total of 8 pins on it. I would like you to keep in mind that this buffer amplifier needs to be run at a voltage of 15V. This particular linear amplifier is a type of Operational Amplifier device, to be precise. The buffer op amp includes 8 pins. The input offset voltage is 150μV. For this electrical component, Surface Mount is the recommended mounting type. The buffer amplifier functions well at 0°C~70°C as far as operating temperature is concerned. In order for this instrumentation amplifier to operate, the supply current needs to be between 1.4μA and 10 . It is a member of the 113.98dB's 113.98dB family. This op amp ic has 1 circuits. A benefit of this op amp ic is that it outputs Rail-to-Rail signals, which is one of the many advantages it has to offer. There is a rating of 1 for the operating supply voltage of the buffer op amp. TAPE AND REEL is adopted to pack the instrumentation amplifier. This buffer amplifier is assigned within the Over-The-Top? series by its manufacturer.
LT1494CMS8#TRPBF Features
8 Pins
supply voltage of 15V
113.98dB voltage gain
Output Type: Rail-to-Rail
LT1494CMS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1494CMS8#TRPBF Instrumentational OP Amps applications.
- Commercial audio systems
- Television broadcasting equipment
- High/low-pass filter circuit
- Switching amplifier
- Tablets
- Blood pressure sensors
- Communication device
- Television
- Gaming industry
- Fission chambers