LT1490AHS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~125°C |
| Packaging | Tape & Reel (TR) |
| Published | 2011 |
| Series | Over-The-Top® |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Operational Amplifier |
| Packing Method | TAPE AND REEL |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 15V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1490 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Rail-to-Rail |
| Number of Elements | 2 |
| Power Supplies | 3/5/+-15V |
| Operating Supply Current | 50μA |
| Supply Current-Max | 0.19mA |
| Slew Rate | 0.07V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | General Purpose |
| Common Mode Rejection Ratio | 60 dB |
| Current - Input Bias | 1nA |
| Voltage - Supply, Single/Dual (±) | 2V~44V ±1V~22V |
| Output Current per Channel | 25mA |
| Input Offset Voltage (Vos) | 110μV |
| Gain Bandwidth Product | 200kHz |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Unity Gain BW-Nom | 200 kHz |
| Voltage Gain | 123.52dB |
| Power Supply Rejection Ratio (PSRR) | 80dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Voltage - Input Offset | 150μV |
| Low-Bias | NO |
| Micropower | YES |
| Programmable Power | NO |
| Nominal Gain Bandwidth Product | 180 kHz |
| Wideband | NO |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1490AHS8#TRPBF Overview
The linear amplifier is packaged in a 8-SOIC (0.154, 3.90mm Width) case. There are two types of operational amplifiers in this circuit. In the case of Tape & Reel (TR) cases, linear amplifier will be delivered. During the past two weeks, there have been close to 8 terminations. In this case, there are 8 pins on the board. The linear amplifier should be run at 15V at all times, so please keep that in mind when using it. A type of Operational Amplifier op amp ic can be identified by the fact that this is a type of Operational Amplifier device. The buffer op amp includes 8 pins. Op amp ic rates 110μV for input offset voltage. Surface Mount is the recommended mounting type for this linear amplifier. With regard to operating temperature, this op amp functions well at -40°C~125°C. The buffer amplifier is capable of operating from a supply current of 50μA . There should be no change in the voltage gain at 123.52dB. This op amp ic outputs Rail-to-Rail signals, which is one of the many benefits it has. The buffer op amp is rated for an operating voltage of 2 when it comes to the power supply. A TAPE AND REEL-shaped amplifier is used to pack the buffer amps. Over-The-Top? is the number that corresponds to the series of the buffer op amp.
LT1490AHS8#TRPBF Features
8 Pins
supply voltage of 15V
123.52dB voltage gain
Output Type: Rail-to-Rail
LT1490AHS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1490AHS8#TRPBF Instrumentational OP Amps applications.
- Industrial applications including automation
- Fast A/D and D/A converters
- Polarized electrodes
- single/dual op amp sum and difference circuits
- Mobile phone
- Voltage regulation circuit
- Large motor controllers
- Band-pass filter
- Radar
- High input resistance broadband