LT1357CN8#PBF

LT1357CN8#PBF

1 Channels 30mA per Channel 120nA 78 dB Instrumentational OP Amps DIP


  • Manufacturer: Analog Devices, Inc.
  • Origchip NO: 84-LT1357CN8#PBF
  • Package: DIP
  • Datasheet: PDF
  • Stock: 286
  • Description: 1 Channels 30mA per Channel 120nA 78 dB Instrumentational OP Amps DIP(Kg)

Details

Tags

Parameters
Lifecycle Status PRODUCTION (Last Updated: 1 week ago)
Package / Case DIP
Number of Pins 8
Max Operating Temperature 70°C
Min Operating Temperature 0°C
Number of Elements 1
Number of Channels 1
Number of Circuits 1
Max Supply Voltage 36V
Min Supply Voltage 5V
Power Dissipation-Max 387mW
Operating Supply Current 2mA
Power Dissipation 387mW
Max Supply Current 2.4mA
Current - Output 30mA
Slew Rate 600 V/μs
Common Mode Rejection Ratio 78 dB
Current - Input Bias 120nA
Output Current per Channel 30mA
Input Offset Voltage (Vos) 200μV
Bandwidth 25MHz
Gain Bandwidth Product 22MHz
Voltage Gain 93.06dB
Power Supply Rejection Ratio (PSRR) 92dB
Max Dual Supply Voltage 18V
Min Dual Supply Voltage 2.5V
Dual Supply Voltage 3V
Nominal Gain Bandwidth Product 25MHz
Number of Amplifiers 1
Height 3.3mm
Length 10.16mm
Width 6.48mm
REACH SVHC No SVHC
RoHS Status RoHS Compliant
Lead Free Lead Free

LT1357CN8#PBF Overview


The linear amplifier is packaged in a DIP case which makes it easy for the consumer to handle. 8 pins are located on the operational amplifiers. Regarding input offset voltage, op amp rates 200μV. This op amp can operate from a supply current at 2mA. Voltage gain should remain at 93.06dB. This op amp ic has 1 circuits. Instrumentation amplifier has 1 channels on it. The temperature should not be lower than 0°C for operational amplifier ics to operate. You should only use instrumentation amplifier at temperatures that are no higher than 70°C. There are 1 elements in this buffer amplifier. Regarding the voltage of the supply, this electrical part can work from a voltage as low as 36V, and this is an excellent feature. To keep the buffer amps' supply voltage higher than 5V. In order to conduct this part, you will need to provide dual supply voltages of 18V volts. The linear amplifier has 1 amplifiers.

LT1357CN8#PBF Features


93.06dB voltage gain

LT1357CN8#PBF Applications


There are a lot of Analog Devices, Inc. LT1357CN8#PBF Instrumentational OP Amps applications.

  • Radar
  • Digital cameras
  • Band-stop filter
  • Home audio systems
  • Multimedia playback equipment
  • Semiconductor detectors
  • MP3
  • Integrator circuits
  • Commercial audio systems
  • Weak signal detection

Write a review

Note: HTML is not translated!
    Bad           Good