LT1191CN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 1 month ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Packaging | Tube |
| Published | 2001 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Operating Temperature | 70°C |
| Min Operating Temperature | 0°C |
| Applications | General Purpose |
| Subcategory | Operational Amplifier |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Supply Voltage | 5V |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Base Part Number | LT1191 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Number of Elements | 1 |
| Power Supplies | 5/+-5V |
| Temperature Grade | COMMERCIAL |
| Operating Supply Current | 32mA |
| Slew Rate | 450V/μs |
| Architecture | VOLTAGE-FEEDBACK |
| Amplifier Type | OPERATIONAL AMPLIFIER |
| Common Mode Rejection Ratio | 55 dB |
| Voltage - Supply, Single/Dual (±) | 4.75V~16V ±2.38V~8V |
| Output Current per Channel | 50mA |
| Input Offset Voltage (Vos) | 1mV |
| Gain Bandwidth Product | 80MHz |
| Neg Supply Voltage-Nom (Vsup) | -5V |
| Unity Gain BW-Nom | 90000 kHz |
| Voltage Gain | 79.08dB |
| Average Bias Current-Max (IIB) | 2.5μA |
| Power Supply Rejection Ratio (PSRR) | 60dB |
| Low-Offset | NO |
| Frequency Compensation | YES |
| Supply Voltage Limit-Max | 9V |
| Bias Current-Max (IIB) @25C | 2.5μA |
| Input Bias Current | 1.5μA |
| Neg Supply Voltage-Max (Vsup) | -9V |
| Nominal Gain Bandwidth Product | 90MHz |
| Wideband | YES |
| Height Seated (Max) | 3.937mm |
| RoHS Status | ROHS3 Compliant |
LT1191CN8#PBF Overview
In the form of a Tube, class d amplifier is packaged.For the sake of reducing space, class d amp is accessible in the 8-DIP (0.300, 7.62mm) package.It is a very good choice for General Purpose due to its high performance.Mounting audio power amplifier on the PCB is done using the Through Hole method.It has a base part number of LT1191 that can be used to audio amp.8 pins are present on audio digital amplifier.A 8 termination is present on digital amplifier.The audio power amplifier is included in Operational Amplifier.Audio amplifier is powered by 32mA supply current.Amplifier ic is constructed using 8 pins.Operating temperatures must be lower than 70°C.Ideally, the operating temperature should be 0°C.The 5V supply voltage enables high efficiency.The audio amplifier owns OPERATIONAL AMPLIFIER amplifier type.There is a voltage gain of 79.08dB in the audio amplifier ic.There are 1 elements in total.
LT1191CN8#PBF Features
Operational Amplifier subcategory
8 pins
LT1191CN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1191CN8#PBF Video Amps and Modules applications.
- General-Purpose Amplifier Applications
- Professional Audio Equipment
- Microphone Preamplifiers
- Aftermarket telematics
- Telematics control unit
- Analog and Digital Mixing Consoles
- Automotive
- Audio Test And Measurement
- External Audio Amplifiers
- Set-Top Box