LT1017IS8#TRPBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width) |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~85°C |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 2 |
| Supply Voltage | 4.5V |
| Time@Peak Reflow Temperature-Max (s) | 30 |
| Base Part Number | LT1017 |
| Pin Count | 8 |
| Qualification Status | Not Qualified |
| Output Type | Pull Up |
| Number of Elements | 2 |
| Power Supplies | 1.1/40V |
| Output Current | 65mA |
| Propagation Delay | 22 μs |
| Quiescent Current | 60μA |
| Supply Current-Max | 0.1mA |
| Common Mode Rejection Ratio | 110 dB |
| Voltage - Supply, Single/Dual (±) | 1.1V~40V ±0.55V~20V |
| Input Offset Voltage (Vos) | 1mV |
| Voltage Gain | 115dB |
| Power Supply Rejection Ratio (PSRR) | 110dB |
| Supply Voltage Limit-Max | 40V |
| Input Bias Current | 15nA |
| Current - Quiescent (Max) | 60μA |
| Voltage - Input Offset (Max) | 1mV @ ±20V |
| Current - Input Bias (Max) | 0.015μA @ ±20V |
| CMRR, PSRR (Typ) | 115dB CMRR, 110dB PSRR |
| Current - Output (Typ) | 65mA @ 4.5V |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1017IS8#TRPBF Overview
A convenient transport package is provided in 8-SOIC (0.154, 3.90mm Width) .A comparator with an output type of Pull Up is being used.This chip is designed with the Tape & Reel (TR) package.You can find 8 terminals of the comparator.Electronic comparator is a part of Comparator family.In the presence of a 4.5V voltage, the comparator is capable of accomplishing a variety of demanding tasks.In terms of type, this is a typical General Purpose comparator.The total number of elements is 2 .There are 8 pins on this board.The recommended mounting type is Surface Mount .Electronic comparator is recommended that you set the operating temperature to -40°C~85°C in order to prevent malfunctions.The comparator has 8 pins.You may wish to search LT1017 for more solutions that address your specific needs.There is a quiescent current of 60μA in this comparator.A power supply of 1.1/40V is sufficient for the operation of the device.The voltage formula shows that the part has a voltage gain of 115dB .With this part, a minimum current of 0.1mA can be supplied.
LT1017IS8#TRPBF Features
Pull Up output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 60μA
Voltage Gain: 115dB
LT1017IS8#TRPBF Applications
There are a lot of Linear Technology/Analog Devices LT1017IS8#TRPBF linear comparators applications.
- Lithium ion battery monitoring
- Wide Range VCO; MOS Clock Timers
- General-Purpose, Low-Voltage Applications
- Infotainment and Clusters
- Notebooks and PDAs
- Point of load regulators
- Limit Comparators
- Mobile Phones and Tablets
- Set Top Boxes
- Metering Systems