LT1011ACN8#PBF
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Lifecycle Status | PRODUCTION (Last Updated: 2 weeks ago) |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm) |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | 0°C~70°C |
| Packaging | Tube |
| Published | 2008 |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| ECCN Code | EAR99 |
| Type | General Purpose |
| Terminal Finish | Matte Tin (Sn) |
| Subcategory | Comparator |
| Technology | BIPOLAR |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Supply Voltage | 15V |
| Terminal Pitch | 2.54mm |
| Base Part Number | LT1011 |
| Pin Count | 8 |
| Output Type | Open Collector |
| Number of Elements | 1 |
| Output Current | 50mA |
| Propagation Delay | 150 ns |
| Quiescent Current | 4mA |
| Turn On Delay Time | 150 ns |
| Response Time | 150 ns |
| Common Mode Rejection Ratio | 115 dB |
| Voltage - Supply, Single/Dual (±) | 3V~36V ±1.5V~18V |
| Input Offset Voltage (Vos) | 500μV |
| Neg Supply Voltage-Nom (Vsup) | -15V |
| Voltage Gain | 113.98dB |
| Average Bias Current-Max (IIB) | 0.025μA |
| Input Bias Current | 25nA |
| Voltage - Input Offset (Max) | 0.75mV @ ±15V |
| Current - Input Bias (Max) | 0.035μA @ ±15V |
| CMRR, PSRR (Typ) | 115dB CMRR |
| Height | 3.302mm |
| Length | 10.16mm |
| Width | 6.477mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | ROHS3 Compliant |
| Lead Free | Lead Free |
LT1011ACN8#PBF Overview
For convenience, it is packaged in 8-DIP (0.300, 7.62mm) .Output type of this comparator is Open Collector .Electronic comparator is shipped by Tube .The comparator has 8 terminals.The electrical component here belongs to the Comparator family.With a voltage of 15V supplied, the comparator is capable of performing a wide range of demanding tasks.Electronic comparator is possible to classify the chip as General Purpose .The total number of elements is 1 .The device is equipped with 8 pins.The recommended mounting type is Through Hole .To ensure proper functioning, the operating temperature should be set to 0°C~70°C .The comparator is equipped with 8 pins.You can search LT1011 if you are looking for more pin-to-pin solutions.As a result, this comparator displays a quiescent current of 4mA .A voltage gain of 113.98dB can be determined from the voltage formula for the part.
LT1011ACN8#PBF Features
Open Collector output capability
General Purpose IC
Employing 1 elements
Operates under 0°C~70°C
Quiescent Current: 4mA
Voltage Gain: 113.98dB
LT1011ACN8#PBF Applications
There are a lot of Linear Technology/Analog Devices LT1011ACN8#PBF linear comparators applications.
- High-Speed Differential Line Receiver
- General-Purpose, Low-Voltage Applications
- Ultra-Low Power Systems
- Automatic Test Equipment
- Wearable Devices
- Battery-Powered Electronics
- System control and monitoring
- Multivibrators and High-Voltage Digital Logic Gates
- Pulse, Squarewave, and Time Delay Generators
- Hand-Held Electronics