LNK6777E
| Parameters | |
|---|---|
| Output Power | 85W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Width | 2.01mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Surface Mount | NO |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 90W |
| Max Power Dissipation | 117W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.7mA |
| Output Current | 15μA |
LNK6777E Overview
This ac to dc converter is embedded in package 7-SIP, 6 Leads, Exposed Pad, Formed Leads .The AC/DC power converter Tube is available for this product.This AC/DC converter is mounted in the way of Through Hole .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs ANALOG CIRCUIT analog IC type.When the switching frequency reaches 120kHz~136kHz , the circuit is closed.Total terminations are 6 .There are 6 pins on the ac/dc converter.It belongs to the family of LinkSwitch?-HP manufacturers.Switching Regulator or Controllers includes the ac to dc conversions.Currently, the output current is set to 15μA .You can read the standard for REACH SVHC at: No SVHC .Input voltage for the AC to DC converter is available under 265V .There is 85W output power generated by a coverter.The AC to DC inverter may be operated with an input voltage less than 85V volts.Input voltage (AC) should be below 265V .
LNK6777E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA
LNK6777E Applications
There are a lot of Power Integrations LNK6777E AC DC Converters applications.
- Set Top Boxes (STB)
- Battery chargers for media tablets
- Automotive Telematics
- Battery Chargers
- Battery chargers for cordless
- Auxiliary Power Supply
- Power Adaptors
- Auxiliary Power Supplies
- White goods
- Laptops