LNK6776E
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Surface Mount | NO |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 68W |
| Max Power Dissipation | 88W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.6mA |
| Output Current | 15μA |
| Output Power | 60W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Width | 2.01mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6776E Overview
An embedded ac to dc converter is included in 7-SIP, 6 Leads, Exposed Pad, Formed Leads package.There is a AC/DC power converter of Tube available.There is a mounting point for this AC/DC converter in the way of Through Hole .The ac dc converter should be operated at a temperature of -40°C~150°C TJ °C to deliver its optimal performance.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.At this point, the switching frequency reaches 120kHz~136kHz .In total, it has 6 terminations.There are 6 pins on this ac/dc converter.A member of the LinkSwitch?-HP manufacturer family, it has the following characteristics.There are a ac to dc conversions included in Switching Regulator or Controllers .It has been set to 15μA for the output current.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 265V voltage.It is assumed that a coverter generates 60W as its output power.Input voltages less than 85V volts can be used to operate the AC to DC inverter.Input voltage (AC) should be below 265V .
LNK6776E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA
LNK6776E Applications
There are a lot of Power Integrations LNK6776E AC DC Converters applications.
- Vacuum Cleaner
- Appliances
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Universal Off-Line Power Supplies
- Wall switches
- Auxiliary Power Supplies
- Battery Chargers
- Air Conditioning
- Set -Top Box (STB) Power Supply
- Power Adaptors