LNK6773V
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 12-SDIP (0.412, 10.46mm) Exposed Pad |
| Surface Mount | NO |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 15W |
| Max Power Dissipation | 25W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.2mA |
| Output Current | 15μA |
| Output Power | 15W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.34mm |
| Length | 10.46mm |
| Width | 10.16mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6773V Overview
In the 12-SDIP (0.412, 10.46mm) Exposed Pad package, the ac to dc converter is embedded.There is a AC/DC power converter of Tube available.This AC/DC converter is mounted in the way of Through Hole .For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.When the switching frequency reaches 120kHz~136kHz , the circuit is closed.There have been 11 terminations of this program.In this ac/dc converter, there are 11 pins.This AC to DC converter belongs to the LinkSwitch?-HP manufacturer family.There are a ac to dc conversions included in Switching Regulator or Controllers .It has been set to 15μA for the output current.In the following link, you will find the REACH SVHC standard: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .The output power of a coverter generates 15W .An input voltage of less than 85V volts is acceptable for use with this AC to DC inverter.An input voltage (AC) should be applied under 265V to the AC to DC power converter.
LNK6773V Features
Packaged with 12-SDIP (0.412, 10.46mm) Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
Output Current at 15μA
LNK6773V Applications
There are a lot of Power Integrations LNK6773V AC DC Converters applications.
- Chargers for cell/cordless phones
- Appliance Power Supplies
- AC/DC LED Driver applications
- AC?DC USB chargers for Cell Phones
- Home appliances
- Standby and Auxiliary Power Supplies Set Top Boxes (STB)
- Portable Apparatus
- Z-Wave
- ATX/BTX Auxiliary Power
- Automotive Infotainment