LNK6768K
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 48W |
| Max Power Dissipation | 68W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Length | 10.16mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6768K Overview
This ac to dc converter is embedded in package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad .There is a AC/DC power converter of Tube available.Surface Mount mounts this AC/DC converter.It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.When the switching frequency reaches 120kHz~136kHz , the process is complete.In total, there are 11 terminations.It contains 11 pins.The ac dc converters is suitable for mounting by Surface Mount .This AC to DC converter belongs to the LinkSwitch?-HP family of manufacturers.You are able to read the REACH SVHC standard at: No SVHC .The AC to DC converter input voltage can be powered under 265V .Input voltages less than 85V volts can be used to operate the AC to DC inverter.An input voltage (AC) should be applied under 265V to the AC to DC power converter.
LNK6768K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6768K Applications
There are a lot of Power Integrations LNK6768K AC DC Converters applications.
- RCC SMPS
- Linear Adapter Replacements
- Cellular phone chargers
- Remotely-controlled appliances
- Off--line Battery Charger
- Humidifier
- WiFi Wireless
- Automotive Telematics
- Charger
- AC?DC USB chargers for Cameras