LNK6767E
| Parameters | |
|---|---|
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.7mA |
| Output Current | 15μA |
| Output Power | 85W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Width | 2.01mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Surface Mount | NO |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 90W |
| Max Power Dissipation | 117W |
LNK6767E Overview
This ac to dc converter is embedded in package 7-SIP, 6 Leads, Exposed Pad, Formed Leads .The AC/DC power converter is available in Tube .Through Hole mounts this AC/DC converter.The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.Analog IC type ANALOG CIRCUIT is utilized in this AC DC converter.When the switching frequency reaches 120kHz~136kHz , the circuit is closed.As a result, it has a total of 6 terminations.It contains 6 pins.This AC to DC converter belongs to the LinkSwitch?-HP family of manufacturers.The ac to dc conversions are contained in Switching Regulator or Controllers .15μA is set as the output current.You are able to read the REACH SVHC standard at: No SVHC .There is a possibility of powering the AC to DC converter under a voltage of 265V .The output power of a coverter generates 85W .An input voltage of less than 85V V is required to operate the AC to DC inverter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK6767E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA
LNK6767E Applications
There are a lot of Power Integrations LNK6767E AC DC Converters applications.
- Standby power
- Adaptors for DSCs
- IoT Applications
- Shaver Charger
- WiFi Wireless
- Laptops
- USB type-c v1.2 chargers with optional VDM
- Standby and Auxiliary Power Supplies
- Switching AC-DC Adapter
- Set Top Boxes (STB)