LNK6765K
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Number of Pins | 11 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| HTS Code | 8542.39.00.01 |
| Power Rating | 31W |
| Max Power Dissipation | 42W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Terminal Pitch | 1.78mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Height Seated (Max) | 2.49mm |
| Length | 10.16mm |
| Width | 8.89mm |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6765K Overview
There is a ac to dc converter embedded in package 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad .Tube case is available for the ac dc converter.There is a AC/DC converter mounted in the way of Surface Mount .To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.Switching frequency reaches 120kHz~136kHz Hz.There are a total of 11 terminations.There are 11 pins on this ac/dc converter.The ac dc converters are suitable to mount by Surface Mount .It is a member of LinkSwitch?-HP manufacturer family.You may read the REACH SVHC standard at No SVHC .The AC to DC converter can be powered from the input voltage under 265V .A voltage of less than 85V V can be used with the AC to DC inverter.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK6765K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at 120kHz~136kHz
With 11 pins
LNK6765K Applications
There are a lot of Power Integrations LNK6765K AC DC Converters applications.
- 3.3V power supplies
- Auxiliary Power Supplies
- Z-Wave
- USB type-c v1.2 chargers with optional VDM
- Charger
- Home Appliance Applications
- AC?DC USB chargers for Cameras
- Air Conditioning
- Remotely-controlled appliances
- Auxiliary Power Supply