LNK6764E
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Surface Mount | NO |
| Number of Pins | 6 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2014 |
| Series | LinkSwitch™-HP |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| HTS Code | 8542.39.00.01 |
| Subcategory | Switching Regulator or Controllers |
| Power Rating | 36W |
| Max Power Dissipation | 47W |
| Terminal Position | ZIG-ZAG |
| Number of Functions | 1 |
| Terminal Pitch | 1.27mm |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 1.3mA |
| Output Current | 15μA |
| Output Power | 30W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Control Mode | CURRENT-MODE |
| Frequency - Switching | 120kHz~136kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Over Load, Over Temperature, Over Voltage, Short Circuit |
| Duty Cycle | 64% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 650V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Width | 2.01mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK6764E Overview
The ac to dc converter is embedded in 7-SIP, 6 Leads, Exposed Pad, Formed Leads package.It is available in Tube AC/DC power converter.Through Hole is mounted in the way of this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.Analog ICs of type ANALOG CIRCUIT are used in this AC DC converter.120kHz~136kHz is the switching frequency.Total terminations are 6 .A ac/dc converter with 6 pins is available.It belongs to the manufacturer family of LinkSwitch?-HP .AC to DC converter is contained in Switching Regulator or Controllers .AC to DC converter is set to 15μA for the output current.This is the standard of REACH SVHC : No SVHC .The AC to DC converter input voltage can be powered under 265V .The output power of a coverter generates 30W .If the input voltage is less than 85V V, the AC to DC inverter can be used.There should be a voltage (AC) that can be applied to the AC to DC power converter under 265V .
LNK6764E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at 120kHz~136kHz
With 6 pins
Output Current at 15μA
LNK6764E Applications
There are a lot of Power Integrations LNK6764E AC DC Converters applications.
- Low power ac?dc Adapters for Chargers
- Rice Cooker
- Tablets
- Dimmers
- White goods
- Switching AC-DC Adapter
- Universal Off-Line Power Supplies
- LED lights
- AC/DC Adaptors/Chargers for PDAs
- Digital cameras