LNK6418E
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 7-SIP, 6 Leads, Exposed Pad, Formed Leads |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | LinkSwitch™-3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 6 |
| Max Power Dissipation | 10W |
| Terminal Position | ZIG-ZAG |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| JESD-30 Code | R-PZIP-T6 |
| Number of Outputs | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 700mA |
| Output Current | 1A |
| Output Power | 10W |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Supply Voltage (AC) | 264V |
| Duty Cycle | 55% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Supply Voltage (AC) | 90V |
| RoHS Status | RoHS Compliant |
LNK6418E Overview
There is a ac to dc converter embedded in package 7-SIP, 6 Leads, Exposed Pad, Formed Leads .It is available in Tube AC/DC power converter.It is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.This AC DC converter employs ANALOG CIRCUIT analog IC type.Up to 85kHz is the switching frequency.A total of 6 terminations have been recorded.Through Hole is a suitable mounting point for the ac dc converters.A member of the LinkSwitch?-3 manufacturer family, it has the following characteristics.A total of 1 outputs need to be run.1A is set as the output current.In the AC to DC transformer of a coverter, the output power is 10W .A minimum voltage supply across the converter is 90V .It is possible to supply 264V voltage across the converter.
LNK6418E Features
Packaged with 7-SIP, 6 Leads, Exposed Pad, Formed Leads
Switching Frequency at Up to 85kHz
Output Current at 1A
LNK6418E Applications
There are a lot of Power Integrations LNK6418E AC DC Converters applications.
- AC?DC USB chargers for Cell Phones
- AC/DC Adaptors/Chargers for E-books
- Smartphones
- Utility meters
- Automotive Infotainment
- LED Driver
- Portable audio
- 3.3V power supplies
- Automotive Clusters
- Adaptors for DSCs