LNK6407K
| Parameters | |
|---|---|
| Time@Peak Reflow Temperature-Max (s) | NOT SPECIFIED |
| Number of Outputs | 1 |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 700mA |
| Output Current | 1A |
| Output Power | 9W |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Supply Voltage (AC) | 264V |
| Duty Cycle | 55% |
| Output Isolation | Isolated |
| Voltage - Breakdown | 725V |
| Min Supply Voltage (AC) | 90V |
| Height Seated (Max) | 2.49mm |
| Width | 8.89mm |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 4 Weeks |
| Mount | Surface Mount |
| Mounting Type | Surface Mount |
| Package / Case | 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2016 |
| Series | LinkSwitch™-3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 3 (168 Hours) |
| Number of Terminations | 11 |
| Max Power Dissipation | 9W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | NOT SPECIFIED |
| Number of Functions | 1 |
LNK6407K Overview
The ac to dc converter is embedded in 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad package.Tube case is available for the ac dc converter.Surface Mount mounts this AC/DC converter.For the ac dc converter to perform properly, it should be operated at a temperature of -40°C~150°C TJ °C.This AC DC converter employs ANALOG CIRCUIT analog IC type.In this AC to DC transformer, the switching frequency is Up to 85kHz .It has a total of 11 terminations.The ac dc converters is suitable for mounting by Surface Mount .A member of the LinkSwitch?-3 manufacturer family, it has the following characteristics.The number of outputs to run is 1 .There is 1A output current set.In the AC to DC transformer of a coverter, the output power generated is 9W .A minimum voltage of 90V is required across the converter.This converter can operate at a maximum supply voltage of 264V .
LNK6407K Features
Packaged with 12-BESOP (0.350, 8.89mm Width), 11 Leads, Exposed Pad
Switching Frequency at Up to 85kHz
Output Current at 1A
LNK6407K Applications
There are a lot of Power Integrations LNK6407K AC DC Converters applications.
- Battery chargers for cordless
- Power adapters for monitors
- AC--DC Adapter
- Adapter/Charger for Cordless Phones
- MPS parts
- AC/DC Adaptors/Chargers for Cordless Phone
- Automotive Telematics
- Set-top boxes
- Set Top Boxes (STB)
- Power Adaptors