LNK616PG
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-II |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| Power Rating | 6.1W |
| Max Power Dissipation | 6.1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 438mA |
| Max Supply Voltage | 9V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 520μA |
| Power Dissipation | 5.5W |
| Output Current | 654mA |
| Output Power | 6.1W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK616PG Overview
In the 8-DIP (0.300, 7.62mm), 7 Leads package, the ac to dc converter is embedded.The AC/DC power converter type is Tube .It is mounted in the way of Through Hole .It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.The AC DC converter utilizes a type ANALOG CIRCUIT analog IC.In this AC to DC transformer, the switching frequency is Up to 85kHz .In total, there are 8 terminations.The ac/dc converter has 8 pins.The ac-dc converter has 8 pins.The ac dc converters are suitable to mount by Through Hole .It is a member of LinkSwitch?-II manufacturer family.AC to DC converter is necessary to run 1 outputs.There is 654mA output current set.There is 700V voltage output from it.A high efficiency is achieved when operating at a frequency of 65kHz .This is the standard of REACH SVHC : No SVHC .6.1W is the output power of a coverter.Across the converter, the minimum supply voltage is 85V .It is possible to supply 265V voltage across the converter.AC to DC power converters should be able to accept input voltages (AC) below 265V .The AC to DC power supply can function with a minimum supply voltage of -300mV volts.
LNK616PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 654mA
LNK616PG Applications
There are a lot of Power Integrations LNK616PG AC DC Converters applications.
- Wall switches
- Universal input AC/DC adapters (15W - 45W)
- Standby Power Supply
- Set-top boxes
- Z-Wave
- SMPS house keeping power supplies
- AC?DC USB chargers for Tablets
- Linear Adapter Replacements
- Replacements for bulky plug-in transformers
- MP3