LNK614PG
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Surface Mount | NO |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2008 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Termination | Through Hole |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 4.1W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 65kHz |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Max Output Current | 267mA |
| Max Supply Voltage | 9V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Power Dissipation | 3.5W |
| Output Current | 400mA |
| Output Power | 4.1W |
| Max Output Voltage | 700V |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.56mm |
| Width | 7.62mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK614PG Overview
8-DIP (0.300, 7.62mm), 7 Leads is the package in which the ac to dc converter is embedded.The ac dc converter is available in Tube case.In this case, the AC/DC converter is mounted in the way of Through Hole .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.In this AC DC converter, the analog IC type is ANALOG CIRCUIT .Switching frequency reaches Up to 85kHz Hz.It has a total of 8 terminations.On this ac/dc converter, there are 8 pins.There are 8 pins in the ac-dc converter.It belongs to the family of LinkSwitch?-II manufacturers.In this AC to DC transformer, there are 1 outputs to run.It has been set to 400mA for the output current.The voltage output by this AC/DC converter is 700V .High efficiency can be achieved when AC to DC converters frequency is set to 65kHz .Here is the standard for REACH SVHC : No SVHC .The output power of a coverter is assumed to be 4.1W .A minimum voltage supply across the converter is 85V .The maximum supply voltage across the converter is 265V .The input voltage (AC) that can be applied in the AC to DC power converter should under 265V .It is capable of working with a minimum supply voltage of -300mV volts.
LNK614PG Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
Switching Frequency at Up to 85kHz
With 8 pins
Output Current at 400mA
LNK614PG Applications
There are a lot of Power Integrations LNK614PG AC DC Converters applications.
- ZigBee
- Universal Off-Line Power Supplies
- AC-DC Output Power Conversion Applications
- MPS parts
- Adapter/Charger for Cordless Phones
- Replacements for bulky plug-in transformers
- Automotive Infotainment
- Laptops and personal digital assistants
- Appliances
- MP3