LNK614DG-TL
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2009 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| HTS Code | 8542.39.00.01 |
| Max Power Dissipation | 4.1W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Output Voltage | 700V |
| Max Supply Voltage | 9V |
| Min Supply Voltage | -300mV |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 440μA |
| Output Current | 400mA |
| Output Power | 4.1W |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
LNK614DG-TL Overview
This ac to dc converter is embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .The AC/DC power converter type is Tape & Reel (TR) .Surface Mount is mounted in the way of this AC/DC converter.To deliver its performance, the ac dc converter should be operated at a temperature of -40°C~150°C TJ .The AC DC converter uses a type ANALOG CIRCUIT analog integrated circuit.When the switching frequency reaches Up to 85kHz , the circuit is closed.There are a total of 8 terminations.There are 7 pins on the ac/dc converter.There are 8 pins on the ac-dc converter.This AC to DC converter belongs to the LinkSwitch?-II family of manufacturers.400mA is set as the output current.This AC/DC converter produces a voltage of 700V as its output.A coverter produces 4.1W watts of output power.There is -300mV minimum supply voltage requirement for this AC to DC power supply.
LNK614DG-TL Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at Up to 85kHz
With 7 pins
Output Current at 400mA
LNK614DG-TL Applications
There are a lot of Power Integrations LNK614DG-TL AC DC Converters applications.
- Remotely-controlled appliances
- AC/DC Adaptors/Chargers for PDAs
- Networking
- WiFi Wireless
- Utility meters
- Charger
- Standby and Auxiliary Power Supplies
- AC-DC Output Power Conversion Applications
- Chargers for cell/cordless phones
- IoT Applications