LNK606GG-TL
| Parameters | |
|---|---|
| Factory Lead Time | 8 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | LinkSwitch®-II |
| JESD-609 Code | e3 |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Max Power Dissipation | 6.1W |
| Terminal Position | DUAL |
| Peak Reflow Temperature (Cel) | 250 |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G8 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 520μA |
| Output Current | 438mA |
| Output Power | 6.1W |
| Topology | Flyback |
| Frequency - Switching | Up to 85kHz |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 55 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Height Seated (Max) | 3.68mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
LNK606GG-TL Overview
The ac to dc converter is embedded in 8-SMD (7 Leads), Gull Wing package.The AC/DC power converter Tape & Reel (TR) is available for this product.The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ °C in order to achieve its full performance.This AC DC converter employs ANALOG CIRCUIT analog IC type.When the switching frequency reaches Up to 85kHz , the circuit is closed.There are a total of 8 terminations in it.On the ac/dc converter, there are 7 pins.There are 8 pins on the ac-dc converter.It belongs to a manufacturer family of LinkSwitch?-II .There are 1 outputs to be run.It has been set to 438mA for the output current.This AC/DC converter produces a voltage of 6V as its output.It is assumed that a coverter generates 6.1W as its output power.Supply voltage across the converter must be 85V at all times.The maximum supply voltage across the converter is 265V .
LNK606GG-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at Up to 85kHz
With 7 pins
Output Current at 438mA
LNK606GG-TL Applications
There are a lot of Power Integrations LNK606GG-TL AC DC Converters applications.
- Battery chargers for mobile devices with touchpad display
- Replacements for bulky plug-in transformers
- RCC SMPS
- Low-Voltage I/O System Power
- Portable audio
- Power adapters for monitors
- Chargers for cell/cordless phones
- Tablets
- Battery chargers for media tablets
- Consumer electronics