LNK585DG
| Parameters | |
|---|---|
| Factory Lead Time | 6 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | LinkZero™-AX |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Terminal Finish | MATTE TIN |
| Power Rating | 4.5W |
| Max Power Dissipation | 4.5W |
| Peak Reflow Temperature (Cel) | 260 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Number of Outputs | 1 |
| Output Voltage | 5V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 275μA |
| Output Power | 4.5W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 63 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Either |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
LNK585DG Overview
This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width), 7 Leads .The ac dc converter is available in Tube case.Surface Mount mounts this AC/DC converter.It is necessary to operate the ac dc converter at a temperature of -40°C~150°C TJ °C in order for it to perform properly.An analog IC of type ANALOG CIRCUIT is employed in this AC DC converter.In this AC to DC transformer, the switching frequency is 100kHz .A ac/dc converter with 8 pins is available.This AC to DC converter belongs to the LinkZero?-AX manufacturer family.There are 1 outputs to run.There is 5V voltage output from it.It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter can be powered under 265V voltage.Coverters generate 4.5W in terms of output power.An input voltage of less than 85V V is required to operate the AC to DC inverter.The minimum supply voltage across the converter is 85V .There is 265V maximum supply voltage across the converter.An input voltage (AC) should be applied under 265V to the AC to DC power converter.
LNK585DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 100kHz
With 8 pins
LNK585DG Applications
There are a lot of Power Integrations LNK585DG AC DC Converters applications.
- Adapter/Charger for Cell
- Off--line Battery Charger
- Battery chargers for smart phones
- Dimmers
- Shaver Charger
- Replaces linear transformers
- Cleaners
- Industrial controls
- Digital cameras
- AC?DC USB chargers for Tablets