LNK574DG
| Parameters | |
|---|---|
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Factory Lead Time | 12 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Published | 2012 |
| Series | LinkZero™-LP |
| JESD-609 Code | e3 |
| Part Status | Discontinued |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 8 |
| Terminal Finish | MATTE TIN |
| Power Rating | 3W |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Peak Reflow Temperature (Cel) | 260 |
| Number of Functions | 1 |
| Time@Peak Reflow Temperature-Max (s) | 40 |
| Pin Count | 8 |
| Number of Outputs | 1 |
| Min Supply Voltage | 50V |
| Analog IC - Other Type | ANALOG CIRCUIT |
| Operating Supply Current | 250μA |
| Output Current | 375mA |
| Output Power | 3W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Frequency - Switching | 100kHz |
| Max Input Voltage | 265V |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Over Voltage, Short Circuit |
| Max Duty Cycle | 63 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Input Voltage (AC) | 85V |
| Max Input Voltage (AC) | 265V |
| Min Supply Voltage (AC) | 85V |
LNK574DG Overview
There is a ac to dc converter embedded in package 8-SOIC (0.154, 3.90mm Width), 7 Leads .In Tube case, the ac dc converter is available.It is mounted in the way of Surface Mount .The ac dc converter needs to be operated at -40°C~150°C TJ °C in order to perform.ANALOG CIRCUIT analog ICs are employed in this AC DC converter.When the switching frequency reaches 100kHz , the circuit is closed.There are a total of 8 terminations.There are 8 pins on the ac/dc converter.There are a total of 8 pins on the ac-dc converter.This AC to DC converter belongs to the LinkZero?-LP manufacturer family.There are 1 outputs to be processed.AC to DC converter is set to 375mA for the output current.It is possible to read the REACH SVHC standard at: No SVHC .The AC to DC converter input voltage can be powered under 265V .There is 3W output power generated by a coverter.A voltage of less than 85V V can be used with the AC to DC inverter.The minimum supply voltage across the converter is 85V .There is 265V maximum supply voltage across the converter.AC to DC power converters should be able to accept input voltages (AC) below 265V .It is capable of working with a minimum supply voltage of 50V volts.
LNK574DG Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 100kHz
With 8 pins
Output Current at 375mA
LNK574DG Applications
There are a lot of Power Integrations LNK574DG AC DC Converters applications.
- Set-top boxes
- Set Top Boxes (STB)
- Standby power supplies for TV
- Adapters
- Low power ac?dc Adapters for Chargers
- Appliances
- Dimmers
- ZigBee
- RCC SMPS
- Standby and Auxiliary Power Supplies