LNK564DN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154, 3.90mm Width), 7 Leads |
| Surface Mount | YES |
| Number of Pins | 7 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Published | 2008 |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Max Power Dissipation | 3W |
| Terminal Position | DUAL |
| Terminal Form | GULL WING |
| Number of Functions | 1 |
| Pin Count | 8/7 |
| Number of Outputs | 1 |
| Output Voltage | 6V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 220μA |
| Output Current | 330mA |
| Output Power | 3W |
| Topology | Flyback |
| Frequency - Switching | 100kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 4.9mm |
| Width | 3.9mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK564DN-TL Overview
This ac to dc converter is included in the package 8-SOIC (0.154, 3.90mm Width), 7 Leads .You can get it in AC/DC power converter Tape & Reel (TR) .There is a AC/DC converter mounted in the way of Surface Mount .This ac dc converter should be operated at a temperature of -40°C~150°C TJ °C so that it can deliver its performance.The AC DC converter uses a type SWITCHING REGULATOR analog integrated circuit.When the switching frequency reaches 100kHz , the process is complete.As a result, it has a total of 7 terminations.There are 7 pins on this ac/dc converter.There are 8/7 pins in the ac-dc converter.It belongs to the family of LinkSwitch?-LP manufacturers.AC to DC converter is necessary to run 1 outputs.Current output is set to 330mA .The output voltage of the AC/DC converter is 6V .Coverters generate 3W in terms of output power.There should be no less than 85V voltage across the converter.There is a maximum supply voltage of 265V across the converter.
LNK564DN-TL Features
Packaged with 8-SOIC (0.154, 3.90mm Width), 7 Leads
Switching Frequency at 100kHz
With 7 pins
Output Current at 330mA
LNK564DN-TL Applications
There are a lot of Power Integrations LNK564DN-TL AC DC Converters applications.
- Adapter/Charger for Cordless Phones
- Switching AC-DC Charger
- Auxiliary Power Supplies
- AC?DC USB chargers for Tablets
- AC?DC USB chargers for Cameras
- AC/DC Adaptors/Chargers for E-books
- Wireless System
- IoT Applications
- Laptops
- Adapters for Handheld Electronics