LNK563GN-TL
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mounting Type | Surface Mount |
| Package / Case | 8-SMD (7 Leads), Gull Wing |
| Surface Mount | YES |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tape & Reel (TR) |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 4 (72 Hours) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power (Watts) | 2.5W |
| Max Power Dissipation | 2.5W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Pin Count | 8 |
| JESD-30 Code | R-PDSO-G7 |
| Output Voltage | 5.8V |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 220μA |
| Topology | Flyback |
| Output Current-Max | 0.2A |
| Frequency - Switching | 83kHz |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 265V |
| Output Isolation | Isolated |
| Voltage - Breakdown | 700V |
| Min Supply Voltage (AC) | 85V |
| Length | 9.575mm |
| Width | 6.35mm |
| Radiation Hardening | No |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK563GN-TL Overview
There is a ac to dc converter embedded in package 8-SMD (7 Leads), Gull Wing .The AC/DC power converter type is Tape & Reel (TR) .The AC/DC converter is mounted in the way of Surface Mount .It is recommended that the ac dc converter be operated at a temperature of -40°C~150°C TJ in order to ensure its performance.SWITCHING REGULATOR analog ICs are employed in this AC DC converter.When the switching frequency reaches 83kHz , the circuit is closed.Total terminations are 7 .On the ac/dc converter, there are 8 pins.There are 8 pins in the ac-dc converter.This AC to DC converter belongs to the LinkSwitch?-LP family of manufacturers.This AC/DC converter produces a voltage of 5.8V as its output.Ac to dc inverters can only be powered at a maximum current of 0.2A .This converter requires a minimum supply voltage of 85V volts.Across the converter, a maximum supply voltage of 265V may be applied.
LNK563GN-TL Features
Packaged with 8-SMD (7 Leads), Gull Wing
Switching Frequency at 83kHz
With 8 pins
LNK563GN-TL Applications
There are a lot of Power Integrations LNK563GN-TL AC DC Converters applications.
- Switching AC-DC Charger
- USB-PD 2.0
- Auxiliary Power Supply
- Adapter/Charger for Cell
- Remotely-controlled appliances
- Records
- WiFi Wireless
- Tablets
- Consumer electronics
- 3.3V power supplies