LNK562PN
| Parameters | |
|---|---|
| Factory Lead Time | 4 Weeks |
| Mount | Through Hole |
| Mounting Type | Through Hole |
| Package / Case | 8-DIP (0.300, 7.62mm), 7 Leads |
| Number of Pins | 8 |
| Operating Temperature | -40°C~150°C TJ |
| Packaging | Tube |
| Series | LinkSwitch®-LP |
| JESD-609 Code | e3 |
| Pbfree Code | yes |
| Part Status | Active |
| Moisture Sensitivity Level (MSL) | 1 (Unlimited) |
| Number of Terminations | 7 |
| ECCN Code | EAR99 |
| Terminal Finish | Matte Tin (Sn) |
| Power Rating | 1.9W |
| Max Power Dissipation | 1.9W |
| Terminal Position | DUAL |
| Number of Functions | 1 |
| Terminal Pitch | 2.54mm |
| Frequency | 66kHz |
| Pin Count | 8 |
| JESD-30 Code | R-PDIP-T7 |
| Number of Outputs | 1 |
| Output Voltage | 700V |
| Output Type | Adjustable |
| Analog IC - Other Type | SWITCHING REGULATOR |
| Nominal Supply Current | 220μA |
| Output Current | 375mA |
| Output Power | 1.9W |
| Topology | Flyback |
| Min Input Voltage | 85V |
| Max Input Voltage | 265V |
| Control Technique | PULSE WIDTH MODULATION |
| Switcher Configuration | SINGLE |
| Internal Switch(s) | Yes |
| Fault Protection | Current Limiting, Open Loop, Over Temperature, Short Circuit |
| Max Duty Cycle | 70 % |
| Max Supply Voltage (AC) | 265V |
| Duty Cycle | 70% |
| Output Isolation | Isolated |
| Min Supply Voltage (AC) | 85V |
| Height | 3.68mm |
| Length | 9.83mm |
| Width | 6.6mm |
| Radiation Hardening | No |
| REACH SVHC | No SVHC |
| RoHS Status | RoHS Compliant |
| Lead Free | Lead Free |
LNK562PN Overview
An embedded ac to dc converter is included in 8-DIP (0.300, 7.62mm), 7 Leads package.In Tube AC/DC power converter, it is available.It is mounted in the way of Through Hole .Ideally, the ac dc converter should be operated at a temperature of -40°C~150°C TJ degrees Celsius.In this AC DC converter, the analog IC type is SWITCHING REGULATOR .A total of 7 terminations have been recorded.It contains 8 pins.Up to 8 pins are present on the ac-dc converter.The ac dc converters are suitable to mount by Through Hole .It is a member of LinkSwitch?-LP manufacturer family.Running 1 outputs is available.Current output is set to 375mA .In this AC to DC transformer, the output voltage is 700V .A high efficiency is achieved when operating at a frequency of 66kHz .In the following link, you will find the REACH SVHC standard: No SVHC .The AC to DC converter can be powered under 265V voltage.The output power of a coverter is assumed to be 1.9W .The AC to DC inverter may be operated with an input voltage less than 85V volts.A minimum voltage supply across the converter is 85V .There is a maximum supply voltage of 265V across the converter.It uses Adjustable as an output.
LNK562PN Features
Packaged with 8-DIP (0.300, 7.62mm), 7 Leads
With 8 pins
Output Current at 375mA
Output Type : Adjustable
LNK562PN Applications
There are a lot of Power Integrations LNK562PN AC DC Converters applications.
- WiFi Wireless
- Standby Power Supplies
- Air conditioners
- Standby Power for General Off-Line Applications
- Standby Power Supplies
- Switching AC-DC Adapter
- Standby power
- Set -Top Box (STB) Power Supply
- AC/DC Adaptors/Chargers for Cordless Phone
- Standby power supplies for TV